MondoRescue HOWTO

Utilisation and Configuration of Mondo and Mindi under Linux
(Version 2.0.8-rRRR)

Bruno Cornec

   MondoRescue Project

   <bruno@mondorescue.org>

Conor Daly

   MondoRescue Project

   <conor.daly_at_met.ie>

   Copyright  2000-2006 Bruno Cornec

   This  document  describes  the use of mondo and mindi tools to
   realize  disaster recovery backup of your systems. It provides
   information   on   installation,  backup  and  restore  modes,
   hardware  and  software  requirements,  and  answers  to  some
   frequently  asked  questions. The goals are to offer a general
   view of the functions and their best usages. Mondo Rescue is a
   Disaster  Recovery  Solution  which allows you to effortlessly
   backup  and  interactively  restore  Linux,  Windows and other
   supported  filesystem  partitions  to/from CD/DVD-+R/RW media,
   tape, NFS, ... and Mindi Linux provides the bootable emergency
   restore CD/floppy set which Mondo uses at boot-time.

   License

   This HOWTO is a free documentation. you may copy, redistribute
   and/or modify it under the terms of the GNU Free Documentation
   License, Version 1.1.

   or   any   later   version  published  by  the  Free  Software
   Foundation;  with no Invarian t Sections, Front-Cover Texts or
   Back-Cover  Texts. This document is distributed hoping it will
   be   useful,  but  without  any  guaranty;  you're  completely
   responsible  of  its  use,  and  coulnd't  complain in case it
   doesn't  work  ,  or  even  if it breaks the hardware. All the
   software  included  in  it,  if  not  alr  eady copyrighted is
   released under the GPL.
     _________________________________________________________

   Table of Contents
   1. About this Guide

        1.1. Purpose / Scope of this Guide
        1.2. New versions of this document
        1.3. Suggestions / Feedback
        1.4. Aknowledgements

   2. QuickStart
   3. Overview

        3.1. Mondo Rescue
        3.2. Mindi
        3.3. Linux Backup
        3.4. Windows Backup

              3.4.1. Windows ME/95/98
              3.4.2. Windows NT4/2K/XP

        3.5. Mondo Rescue and Mindi Linux History
        3.6. System Requirements

              3.6.1. Hardware Requirements
              3.6.2. Kernel Requirements
              3.6.3. Software Requirements

   4. Installation

        4.1. Mindi Installation
        4.2. Mondo Installation

   5. Tests

        5.1. Testing Mindi

   6. Backup

        6.1. Recommandations
        6.2. Backup Commands and Options

              6.2.1. Standard Example With CD-R
              6.2.2. Standard Example With CD-RW
              6.2.3. Standard Example With Tape
              6.2.4. Standard Example With Failsafe kernel
              6.2.5. Standard Example With Network Backup

   7. HOWTO run mondo interactively using cron

        7.1. Overview
        7.2. Introduction
        7.3. Who should read this?

              7.3.1. Insurance
              7.3.2. Efficiency

        7.4. The Problem

              7.4.1. Cron's environment
              7.4.2. Interactivity
              7.4.3. Screen

        7.5. The Solution

              7.5.1. Briefly
              7.5.2. In Detail

   8. Compare
   9. Restore

        9.1. Overview
        9.2. Tips and Tricks

              9.2.1. Barebones (Nuke) Restore
              9.2.2. Interactive Restore
              9.2.3. Expert Restore
              9.2.4. Modified partitions - Restore to a different
                      disk geometry

              9.2.5. Advanced

   10. FAQ

        10.1. Overview
        10.2. General Questions
        10.3. Booting and Kernel related Questions
        10.4. Installation related Questions
        10.5. Hardware related Questions
        10.6. Backup related Questions
        10.7. Compare related Questions
        10.8. Restore related Questions

   A. GNU Free Documentation License

        0. PREAMBLE
        1. APPLICABILITY AND DEFINITIONS
        2. VERBATIM COPYING
        3. COPYING IN QUANTITY
        4. MODIFICATIONS
        5. COMBINING DOCUMENTS
        6. COLLECTIONS OF DOCUMENTS
        7. AGGREGATION WITH INDEPENDENT WORKS
        8. TRANSLATION
        9. TERMINATION
        10. FUTURE REVISIONS OF THIS LICENSE
        How to use this License for your documents
     _________________________________________________________

Chapter 1. About this Guide

1.1. Purpose / Scope of this Guide

   This  HOWTO  serves  to  help  people  get  started with using
   mondo/mindi  as  way to backup/restore their system. This is a
   work  constantly  evolving.  It was started by Hugo Rabson and
   has  since  been  worked  upon  by a number of people. See the
   'About'  web  page  for  a  list of members of the development
   team.

   There  are  many  ways  to  contribute  to  the Linux movement
   without  actually  writing  code. One of the most important is
   writing  documentation,  allowing  each  person to share their
   knowledge  with  thousands  of  others  around the world. This
   HOWTO   is   designed  to  help  you  get  familiar  with  how
   Mondo/Mindi works.

   Opinions expressed here are those of the authors. Informations
   are  provided in the aim to be useful to the readers. However,
   there  can't  be,  through  this document, any warranty of any
   kind on the way it works on your systems, nor the author could
   be  responsible  for  any  problem  caused by the use of these
   informations.  However,  software editors don't garantee you a
   lot either (re-read the contracts).
     _________________________________________________________

1.2. New versions of this document

   The  newest  version  of  this document can always be found on
   MondoRescue's homepage MondoRescue.

   If  you  make  a  translation  of  this  document into another
   language,  please let meknow so that I can include a reference
   to it here.
     _________________________________________________________

1.3. Suggestions / Feedback

   I  rely  on  you,  the reader, to make this HOWTO useful. THis
   HOWTO  is  probably incomplete even if it tries to be accurate
   to  the  best  of  our knowledge. If you have any suggestions,
   corrections,  recommandations  or  congratulations  :-)  don't
   hesitate  to  send  them  to me <bruno@mondorescue.org>, and I
   will  try  to  incorporate  them  in a next revision or to the
   mondorescue    mailing    list;    e-mail    the    list    at
   mondo-devel@lists.sourceforge.net;  tell  us what is wrong and
   how  it  should  be  fixed.  Include  the  section  title  and
   recommended  changes.  Whenever  possible,  include the exact,
   spell-checked,  grammar-checked  text  that  you  think  would
   improve the document.

   See Mondo's Feedback page for more information.

   Please  note  that  we  do our best to help everyone but it is
   difficult  for  us to help you if you do not attach a log file
   to  your  e-mail. Let me say that again - attach your log file
   to  your  e-mail!  Thank  you.  Without  it we can't offer any
   tangible  help  because you aren't either. That's what the log
   file  is for. It is located at /var/log/mondo-archive.log; and
   /var/log/miindi.log or at /var/log/mondo-restore.log

   This   document   was  originaly  written  by  native  english
   speakers, but is maintained by a non-native english speaker so
   help  me  correct mistaques instead of rumbling that I've done
   one :-)

   I  am also willing to answer general questions on MondoRescue,
   the  best  I  can.  Before  doing  so,  please read all of the
   information   in   this  HOWTO,  and  then  send  me  detailed
   information  about  the problem, especially including the logs
   generated  by  the  tools,  or traces obtained (Did I say that
   already :-].

   If  you publish this document on a CD-ROM or in hardcopy form,
   a  complimentary  copy  would  be  appreciated; mail me for my
   postal  address.  Also consider making a donation to the Linux
   Documentation  Project  to help support free documentation for
   Linux.  Contact  the  Linux  HOWTO  coordinator, Guylhem AZNAR
   <guylhem@rrremovethis.oeil.qc.ca>.
     _________________________________________________________

1.4. Aknowledgements

   Thanks  goes  to  these  people for helping and adding to this
   HOWTO.

   Document maintainer:

     * Bruno Cornec

   Original Design Assistance by:

     * Xion Network.com

   Original Document Assistance by:

     * Cafeole
     * Troff
     * Randy Delfs
     * Mikael Hultgren

   Original LinuxDoc and LaTeX Reformat by:

     * Bryan J. Smith

   Original DocBook Reformat by:

     * Mikael Hultgren

   Original author; 1.6x material:

     * Hugo Rabson
     _________________________________________________________

Chapter 2. QuickStart

     * We  recommend  that you read this complete HOWTO. However,
       if  you  are  too  busy or impatient, then please use this
       QuickStart guide to stay out of trouble.
     * Install the tarball, RPM, or DEB mindi and mondo packages.
       (see Installation for more details)
     * Execute as root (type 'su -' to become root if you are not
       logged in as root)

       bash# mondoarchive

   Choose from the list of supported backup media types. The
   media you will use most often are CD/DVD-+R, CD/DVD-+RW, tape,
   NFS and hard disk. If you want to backup/restore over a
   network, choose 'NFS'. If you want to backup/restore to/from a
   local partition or if you simply want to store the ISO images
   in a local directory until you have time or facilities to burn
   them to CD's, choose 'hard disk'. If you choose 'CD/DVD-+R[W]'
   or 'tape' then in general your hardware will be detected and
   configured for you.
   If you are backing up to CD/DVD-+R[W] then Mondo will ask you
   if your CD burner has BurnProof technology, is inside a
   laptop, or is otherwise eccentric. If you are backing up to a
   tape streamer then you will not see this message.
   How much compression do you want? None, if your tape streamer
   has built-in hardware compression. Maximum, if your CPU is
   blazingly fast. Average should do just fine for most
   situations.
   If you want to backup the whole computer (excluding /sys and
   /proc, naturally) then leave this as / which is the default.
   Otherwise, specify subsets, (e.g. /usr/local /home ) being
   sure to put a space in between each path.
   If you are backing up your whole computer then you might want
   to exclude certain directories, e.g. /shared/MP3. Please
   specify them in the 'exclude directories' dialog box. Please
   put a space in between each path, e.g. /shared/private
   /scratch /nfs /windows
   Is your kernel sane? Red Hat, Mandrake, SuSE, Debian and
   Slackware users should in general say 'yes' because these
   vendors are good at producing reliable kernels. If you are
   using Gentoo or LFS then your kernel might be non-standard, in
   which case say 'no' to use Mondo's failsafe kernel (provided
   separately).
   If you want to verify the archives after writing them to
   media, say 'yes' here. If you have absolute faith in your
   hardware and your Linux distribution, say 'no'... and a little
   prayer.
   If you are sure you want to go ahead, say 'yes' and find
   something else to do while Mondo backs up your computer. If
   you say 'no' then you will be unceremoniously dumped at the
   shell prompt. :-)
   The backup process will now commence. There are some
   pre-backup tasks to be carried out first but the backup is
   essentially underway. To simplify the backup process, you were
   asked a series of questions. Next time, if you like, you could
   call mondoarchive with various command-line switches to
   control its behavior, instead of answering a series of
   questions. See the man page for details.
   Mondo will make a catalog of all files to be backed up. This
   may take up to five minutes. The list of files will be divided
   into sets, approximately 4 MB (before compression) of files
   per set. This typically takes one minute.
   Mondo calls Mindi. Mindi generates bootable floppy disk images
   and auxiliary data disk images which are based on your
   existing Linux distribution and filesystem. That way, you can
   be sure Mondo's tools will be compatible with your existing
   filesystems and binaries: Mondo's tools are your tools. Mindi
   takes up to five minutes to run.
   Finally, Mondo begins backing up your computer. This process
   may take a few minutes or a few hours, depending on how much
   data you are archiving, how fast your CPU is, how much RAM you
   have, and so on. It will backup your regular files and then
   your large files (files larger than approximately 32MB). If
   you have opted to verify your backups, Mondo will do that too.
   Do you want to create a boot floppy at the end? Yes, if you're
   a tape or NFS user. No, if you are using CD/DVD-R[W]'s and
   your computer supports bootable CD's. Tape users only need one
   floppy but other users may need more. Mondo will advise
   accordingly.

     * Try  to boot from the first CD of the backup (or the first
       floppy,  if  you  made floppies). Choose 'Compare Mode' by
       typing compare at the boot screen.
     * If  you  can boot, fine. If not, make a Mindi "Test" CD to
       checkout  the  compatibility  of your system. (see Testing
       Mindi  for  more details). Remove the CD/floppy; boot your
       computer as usual; execute as root

       bash# mindi
       bash# cd /root/images/mindi
       (for CD-R)

       bash# cdrecord dev=0,0,0 speed=4 -eject -v mindi.iso
       (for CD-RW)

       bash# cdrecord dev=0,0,0 speed=4 blank=fast -eject -v
       mindi.iso
       Reboot  your  system  with  the created Mindi CD, with the
       BIOS  set to boot from CD. If the result is a command line
       in  'Expert'  mode,  your system checks out. Remove the CD
       and reboot your system.
     * If  you  still  cannot  boot  from  Mindi's CD then please
       e-mail the mondorescue mailing list for help.

   When  making  a  backup on a live system, there will always be
   processes running that will write out data on the system after
   you have made the backup and before you have made the compare,
   this  will result in difference showing up when comparing your
   backup.  For  a full explanation and what can be done to avoid
   this, please read this section.

     * This  QuickStart covers the ideal case. Upon receiving any
       system feedback/errors, read each related HOWTO section.
       Example  2-1.  A  test  backup  of your /home directory to
       CD-Rs using the command line

       bash# mondoarchive -OVc 4 -I /home -gF
       The  'c'  means  you  must be writing to CD-Rs, not CD-RWs
       (the  latter would require 'w' instead of 'c'). The '4' is
       the  speed  of  your CD writer. The string after -I is the
       path to be backed up. The '-gF' means you are going to see
       the  pretty  yellow-on-blue  screen  instead of the boring
       white-on-black  screen.  :)  It  also means Mondo will not
       offer  to  create  physical  boot  floppies for you. It is
       assumed  that you are able to boot from the CD which Mondo
       has generated.
       Example  2-2.  A  backup  of  your whole filesystem to NFS
       using the command line

       bash# mkdir -p /mnt/nfs
       bash# mount 192.168.1.28:/home/nfs /mnt/nfs
       bash# mondoarchive -OVn 192.168.1.28:/home/nfs -gF[...]
       bash# umount /mnt/nfs
       bash# cdrecord dev=0,0,0 speed=4 -eject -v
       /root/images/mindi/mindi.iso
       Note  that  you have to mount the NFS partition, backup to
       it,  unmount  it,  and  create  a  boot CD to allow you to
       restore  from  scratch  if necessary. To reassure yourself
       that  you  will be able to restore from the NFS share even
       if  your  PC  is  wiped, please boot from the Mindi CD and
       type 'compare'. The on-screen instructions from that point
       on should be sufficient.
       Example  2-3.  A  backup  of your whole filesystem to tape
       using the command line

       bash# mondoarchive -OVt -d /dev/st0 -9 -L -g
       In this case, we assume Syslinux is incompatible with your
       boot  media.  For some reason, some BIOSes just don't like
       Syslinux.  If  you  find  this  to  be  the  case for your
       computer,  please  use  '-L'  to  force  Mondo to use LILO
       instead   of   Syslinux   as   the  boot  loader  for  its
       CD/floppies.  (NB:  This has nothing to do with which boot
       loader  your hard drive uses.) Also, it is a good habit to
       specify  your  tape streamer with '-d <device>'. You don't
       usually need to but it's good to be on the safe side. Some
       computers call your tape streamer /dev/osst0, some call it
       /dev/ftape, ...
     _________________________________________________________

Chapter 3. Overview

3.1. Mondo Rescue

   Mondo  Rescue  backs  up  your  file  system  to CD, tape, NFS
   (archives stored remotely) or ISO's (archives stored locally).
   Mondo uses afio as the backup engine; afio is a well-respected
   replacement  for  tar. In the event of catastrophic data loss,
   you  may restore some or all of your system, even if your hard
   drives  are now blank. Mondo Rescue can do a lot of other cool
   things:

     * You  can use Mondo to clone an installation of Linux. Just
       backup the crucial stuff and exclude /home, /var/log, etc.
     * You  can  backup  a non-RAID file system and restore it as
       RAID including the root partition (if your kernel supports
       that).
     * You  can  backup  a  system  running on one and restore as
       another .
     * You  can restructure your partitions, e.g. shrink/enlarge,
       reassign   devices,  add  hard  drives,  etc,  before  you
       partition  and  your  drives. Mondo will restore your data
       and amend /etc/lilo.conf and /etc/fstab accordingly.
     * You  can  backup Linux/Windows systems, including the boot
       sectors. Mondo will make everything right at restore-time.
       (However,  do  run  "Scandisk"  when  you  first boot into
       Windows, just in case.)
     * You  can  use your Mondo backup CD to verify the integrity
       of your computer.

   Mondo's  principal  virtue  is  that  it protects you from the
   problems  that  can  arise  when you reinstall completely from
   scratch.  If  you  want  to wipe and restore your system every
   year  just  as  a  matter of 'good practice', Mondo is not for
   you.  However,  if  you  want to get up and running again in a
   hurry after someone breaks into your computer and wipes it (or
   if you accidentally wipe it yourself) then Mondo is definitely
   for  you.  It  will  permit  you  to roll back to a known-good
   installation  in  a  very  short  period of time, sometimes as
   little  as twenty minutes. Even if you backup large amounts of
   data  to  tape daily and do not want to add yet another backup
   regime,  please  consider backing up the core filesystem (i.e.
   everything  but  the directories containing your huge database
   and  your prizewinning novel) every month or so, just in case.
   You will be glad you did.

   What is Mondo not?

   Mondo is not an everyday backup program. It is not designed to
   replace  tar, afio, kbackup, etc. Mondo is designed to make it
   possible  to  recover  from scratch if necessary. Tar and afio
   offer  a  quick, convenient way to backup small sets of files,
   sometimes to removable media.
     _________________________________________________________

3.2. Mindi

   Mindi Linux creates a set of boot/root floppy disk images that
   will  let  you  perform basic system maintenance on your Linux
   distro.  The  principal  virtues of Mindi's boot disks are the
   fact  that  they  contain  your  kernel,  modules,  tools  and
   libraries.  You  can  ask  for  additional  binaries (or other
   files)  to be included on the kit. The libraries will be added
   for you.

   Whichever   modules  were  loaded  at  backup-time,  they  are
   reloaded  at  boot-time.  So,  in  theory,  you will boot into
   almost the same environment as you were in when you backed up.
   If  you  want  to  add  files  to  your Mindi boot disks, edit
   '<INSTALLPATH  OF  MINDI>/mindi/deplist.txt' and add the files
   to that list. The added files and dependencies, will be spread
   across the data disks at run-time.

   Mindi  makes  sure  that  Mondo  has all the tools it needs at
   boot-time.  Mondo  uses  fdisk,  mkfs,  cat, less, more, afio,
   gzip,   bzip2,   your   keyboard   configuration,  your  glibc
   libraries,  your  other  libraries, your kernel, your modules,
   ... a lot! Mindi takes care of all that, so that Mondo can get
   on with the job of backing up or restoring your data.

   Mindi  is  also handy for making boot CDs/disks which stand on
   their  own.  You  do  not need Mondo. Indeed, if you like, you
   could  use another backup/restore program with Mindi. Just add
   it  to  Mindi's  dependency list (type 'locate deplist.txt' to
   find  it).  Mindi  will  include  your  software  on  its boot
   CD/disks the next time you run mindi.
     _________________________________________________________

3.3. Linux Backup

   Mondo  Rescue  and  Mindi  Linux  are  used primarily as Linux
   backup  and  cloning tools. The fall in prices of CD-RW drives
   and  writable  discs  will  allow  current  users to keep good
   backups and future users to leverage the cloning capability.

   Tape  drives  are  more likely to suit your needs if you run a
   larger installation (or have lots of MP3's). Warning! OnStream
   drives  do not play well with Mondo. I do not know why. It is,
   in  my  opinion,  something  which  OnStream should look into.
   Mondo uses fopen(), fread(), fwrite() and fclose() to interact
   with  tape  drives. That works for most drives but some drives
   just don't like that.

   Mondo   Rescue  has  tested  thousands  of  times  on  various
   computers.  It  worked for them. Thousands of users testify to
   Mondo's stability and its ease of use. However, please test it
   on your own system before you rely on it. In fact, do not rely
   on any software until you have tested it to see if it performs
   as expected.

   To  establish  that  Mondo  will  behave well in an emergency,
   please be prepared. Run a test backup as follows:-

     * Run mondoarchive without any command-line options.
     * Backup  a  subset  of  files  - e.g. /usr/local - to CD or
       tape. Say 'yes' when asked if you want to verify them.
     * If  you  are  not  backing  up  to  CD, please create boot
       floppies when prompted.

   Next, restore archives to your live filesystem.

     * When mondoarchive terminates, run mondorestore without any
       command-line options.
     * Insert  the  CD  or  the  first boot floppy when prompted.
       Press <Enter>. Wait a moment.
     * Select  a  subset of files to restore, e.g. /usr/local/man
       and /usr/local/bin. Hit OK.
     * Restore  files  to  /tmp  or  /root/RESTORED  or something
       similar.
     * When  mondorestore  terminates, compare the restored files
       to the originals using cmp or diff.

   Finally, simulate an emergency restore.

     * Boot from CD/floppies.
     * Select    'Interactive    Mode'    at   boot-time.   (Type
       'interactive' and hit <Enter>.)
     * Hit  OK  when shown the mountlist. Say 'yes' when asked if
       you accept the mountlist.
     * Select   files   to   restore,   e.g.  /usr/local/man  and
       /usr/local/bin. Hit OK.
     * Restore  files  to  /tmp  or  /root/RESTORED  or something
       similar.
     * When  mondorestore  terminates,  please reboot and compare
       the restored files to the originals.

   FYI,  the  subroutines to repartition and reformat your drives
   are  very  stable.  If  you  are  a  RAID  or  LVM  user,  you
   might encounter  some  difficulties  when wiping and restoring
   from  scratch because of the sheer range of filesystem layouts
   and the impossibility of testing Mondo on every single one. If
   you have trouble, just drop to the command-line and partition/
   manually.  Then,  call  mondorestore, select Interactive Mode,
   and say 'no' when asked if you want Mondo to partition or your
   drives for you.

   You  see,  even  if you have trouble, you still have two hands
   and  most  of  the tools you need - lvchange, pvcreate, fdisk,
   mkraid,  etc.  - to do it manually. After you have prepped and
   formatted  your  drives  manually  (if  you have to), just run
   mondorestore again and say 'no' when asked if you want to prep
   or your drives. What could be easier?
     _________________________________________________________

3.4. Windows Backup

   Backing up windows partitions.
     _________________________________________________________

3.4.1. Windows ME/95/98

   Verify  that  the  partition  is  listed  in /etc/fstab and is
   mounted  (e.g.  /dev/hda1). Mondo will take care of everything
   else.  The files will be archived just like all other files in
   the live file system. At restore-time, Mondo will take care of
   the boot sector of /dev/hda1 prior to the restore.

   Note:  if  Windows  ME/95/98  is  not  located on /dev/hda1 or
   /dev/sda1, then Mondo will not take care of the boot sector of
   /dev/hda1.  The  user  will have to boot from a DOS floppy and
   run SYS C: to correct the Windows boot sector.
     _________________________________________________________

3.4.2. Windows NT4/2K/XP

   Windows  NT4/2K/XP  typically  use  the  NTFS file system, not
   VFAT.. The user should use '-x /dev/hda1' (or whichever device
   the Windows partition resides). Mondo will treat the partition
   as a biggiefile. Mondo will also add an entry to the mountlist
   to  reflect  the  size and type of the partition. The user may
   not  edit  that  partition's size at restore-time (for obvious
   reasons).

   Please bear in mind that Mondo was written for Linux users. If
   Mondo does not backup or restore your Windows system well, you
   might want to consider reporting it to the mondorescue mailing
   list
     _________________________________________________________

3.5. Mondo Rescue and Mindi Linux History

   Mondo  Rescue was created in December 1999 by Hugo Rabson as a
   utility  to  clone  Linux/Windows  installations. Norton Ghost
   would not do the job, and his boss wanted to jump on the Linux
   bandwagon. So, he wrote a few scripts and shoehorned them into
   the latest Linux-Mandrake CD. Since that time, Mondo grew into
   a  disaster recovery suite for Linux and Windows. Mondo forced
   him  to  learn  about  the kernel, its initrd initial ramdisk,
   modules,  library  dependencies,  disk  partitioning,  and the
   myriad differences between the Top 10 Linux distributions.

   The  first  formal  release  was  made on February 18th, 2000.
   Mondo  is  currently  one of the top five Linux backup/restore
   programs.  Mondo  has  been  compared  favorably  to ArcServe,
   Arkeia  and  BRU.  Although  Mondo  lacks  the  more advanced,
   enterprise-level   features   of   ArcServe  and  Arkeia,  for
   workstations  and  small-  to  medium-size servers it is ideal
   because  it  is  small,  fast,  efficient,  stable, comes with
   source code, and is being actively developed and supported.

   Since November 2005, Hugo Rabson has tranfered the maintenance
   of  the  Mondo  Rescue  suite  to Andree Leidenfrost and Bruno
   Cornec,  both  previous  developpers and packagers of the tool
   since nearly the begining.
     _________________________________________________________

3.6. System Requirements

3.6.1. Hardware Requirements

   Your computer must have:

     * Intel(R)-compatible CPU (ia32, x86_64/amd64 or ia64)
     * 64MB of RAM (128MB recommended)
     * 800MB of hard disk space free
     * CD  writer, tape streamer, NFS share or some way to backup
       the backups :)

   It  is  recommended that your computer have very good airflow.
   The backup with Mondo Rescue and Mindi Linux will utilize your
   CPU,   CD   drive  and  fixed  disk(s)  like  very  few  other
   applications.  With  a  few  hours  of system backup activity,
   computers without sufficient airflow may show symptoms such as
   not  burning  full  CD  discs.  The  solution is a $20 or less
   additional fan at your local electronics discount store.
     _________________________________________________________

3.6.2. Kernel Requirements

   Your kernel must have:

     * stable  loopfs  support, which means it really needs to be
       2.2.19 or 2.4.7 (or later)
     * CD-ROM device support
     * ISO9660 file system support
     * initrd ramdisk support (built-in)
     * Virtual memory file system support (built-in)
     * floppy disk support (built in)
     * ext2 file system support (built-in)
     * Support for the backup media (Tape, CD-RW, NFS, Hard disk)
     * If  the backup media is CD-RW then you need SCSI emulation
       also
       vfat  support in the active kernel - mindi needs this when
       creating syslinux boot floppies

   Please  note  that  the  stock kernels of Red Hat/RHEL/Fedora,
   Mandrake/Mandriva,  SuSE/SLES/OpenSuSE,  Debian  and Slackware
   all  meet  Mondo's  requirements. If your kernel does not meet
   Mondo's  requirements  then  there is something wrong with it.
   Mondo's demands are not unreasonable.

   Mondo  (specifically  Mindi)  does  not  require  any specific
   module.  It  does  require that your kernel support the initrd
   initial  ramdisk  facility. Typically this is supported by the
   Linux  kernel.  Modules  used  are  needed  to support the CD,
   floppy disks, hard disks, etc. If the support is modular, then
   the  modules  will be incorporated in a boot disk by Mindi. If
   the support is built-in (static), then it will be available at
   boot-time by default.
     _________________________________________________________

3.6.3. Software Requirements

   See Mondo's Download page for details.

   Mondo   requires   afio,  bzip2,  cdrtools/cdrecord/growisofs,
   ncurses,   newt,   isolinux/syslinux,   lzo  (optional),  lzop
   (optional), mkisofs, slang, and a few other packages.

   Good  Linux distributions provide all these packages. If yours
   does not then please go to the aforementioned Download page or
   surf  the  Net, preferably the website of the distribution you
   are using.

   Mondo's  expectations  are  not  unreasonable,  either of your
   Linux  distribution  or  of  your  kernel.  However,  if  your
   distribution  fails  to  meet  its expectations and you cannot
   find  out  how to resolve them, please feel free to e-mail the
   mondorescue mailing list
     _________________________________________________________

Chapter 4. Installation

4.1. Mindi Installation

   If  you are installing from a tarball then copy it to wherever
   you have enough space, for example /tmp and type:

   bash# cd /tmp
   bash# tar -zxvf mindi-1.x.tgz
   bash# cd mindi-1.x
   bash# ./install.sh

   This installs mindi additional files into /usr/local/lib/mindi
   and the program into /usr/local/sbin

   Or,  if  you  are  installing  from an RPM/deb then copy it to
   wherever you have enough space, for example /tmp and type:

   bash# rpm -Uvh /tmp/mindi-1.x-x.i386.rpm
   or
   bash# dpkg -i /tmp/mindi-1.x-x.deb

   This  installs  mindi additional files into /usr/lib/mindi and
   the program into /usr/sbin.
     _________________________________________________________

4.2. Mondo Installation

   If  you are installing from a tarball then copy it to wherever
   you have enough space, for example /tmp and type:

   bash# cd /tmp
   bash# tar -zxvf mondo-2.xx.tgz
   bash# cd mondo-2.xx
   bash# make && make install

   This installs mondo into /usr/local/lib/mondo and installs the
   programs into /usr/local/sbin

   Or, if you are installing from an RPM/deb then copy it to copy
   it  to  wherever  you  have enough space, for example /tmp and
   type:

   bash# rpm -Uvh /tmp/mondo-2.x-x.i386.rpm
   or
   bash# dpkg -i /tmp/mondo-2.x-x.deb

   This  installs  mondo  into  /usr/lib/mondo  and  installs the
   programs into /usr/sbin
     _________________________________________________________

Chapter 5. Tests

5.1. Testing Mindi

   Mindi  is  a  vital  part of the backup procedure. If you have
   used Mondo before or if you are in a hurry, skip steps 6.2 and
   6.3; go straight to QuickStart.

   However,  if  you have time or if you have been having trouble
   getting  Mondo  to  work,  I  would recommend trying out Mindi
   directly  (rather  than  via Mondo) to see if it can produce a
   bootable CD on your system.

   Make  sure you are root while doing this, otherwise mindi will
   fail, now do this.

   If you have any problems, please:-

     * less /var/log/mindi.log
     * feel  free to edit mindi (it's a shell script, btw) to try
       to fix the problem yourself
     * contact the mondorescue mailing list if you get stuck.

   Type:-

   bash# mindi

   Example  screen  output,  selecting to use your own kernel, to
   create boot disks, and to create a bootable CD image:

# mindi
Mindi Linux mini-distro generator v1.06-r343

Latest Mindi is available from http://mondorescue.berlios.de

BusyBox sources are available from http://www.busybox.net

-----------------------------------------------------------------------
-------
Do you want to use your own kernel to build the boot disk (y/n) ?y
Would you like to use LILO (instead of syslinux)
for your boot CD/floppies (y/n) ?n
Analyzing dependency requirements                               Done.
Making complete dependency list                                 Done.
Analyzing your keyboard's configuration.

Adding the following keyboard mapping tables: us-latin1         Done.
Assembling dependency files............................................
.......................
  Done.
The files have been subdivided into 5 directories.
         Your mountlist will look like this:-
    Finding all volume groups
  No volume groups found
  No volume groups found
  No volume groups found
  No volume groups found
        DEVICE          MOUNTPOINT      FORMAT          SIZE (MB)
        /dev/hda1       /               ext3                399
        /dev/hda9       /home           ext3              48478
        /dev/hda6       /usr            ext3               4999
        /dev/hda7       /var            ext3               1000
        /dev/hda5       swap            swap                349
        /dev/hda8       swap            swap               2003
    Finding all volume groups
  No volume groups found
  No volume groups found
  No volume groups found
  No volume groups found
Tarring and zipping the groups..................                Done.
Creating data disk #1...#2...#3...#4...#5...                    Done.
Making 1722KB boot disk...........................1440+0 enregistrement
s lus.
1440+0 enregistrements crits.
mke2fs 1.38 (30-Jun-2005)
cp: criture de vmlinuz: Aucun espace disponible sur le priphrique
Failed to copy /boot/vmlinuz-2.6.12-15mdk-i686-up-4GB to ramdisk

Warning - failed to create 1.44MB boot/root floppies

Warning - failed to create 1.72MB boot image. Please reduce your kernel
's size

if you want to make a 1.72MB floppy disk.

Making 2880KB boot disk...........................mkfs.vfat 2.10 (22 Se
p 2003)
... 2880 KB boot disks were created OK                          Done.
In the directory '/root/images/mindi' you will find the images:-
   mindi-data-1.img    mindi-data-2.img    mindi-data-3.img    mindi-da
ta-4.img    mindi-data-5.img mindi-root.1440.img
Would you like to create boot+data floppy disks now (y/n) ?n
Shall I make a bootable CD image? (y/n) y
NB: Mindi's bootable CD always uses isolinux.

For a bootable CD w/LILO, please use Mondo.

Finished.

Boot and data disk images were created.

#

   If  your  kernel is too large (more than about 900KB) then you
   cannot  make  boot  floppies,  although  you  can still make a
   bootable  CD  image.  The  easiest way to test Mindi in either
   case  is  to  say  'n'  to  its  first question and 'y' to its
   second,  then  use the separate application cdrecord to make a
   bootable CD-R or CD-RW.

   Use the cdrecord application to write the CD image:

   bash# cd /root/images/mindi
   bash# cdrecord -scanbus

   The output of the above call to cdrecord will tell you your CD
   writer's  node.  It  is  usually  '0,0,0'.  Choose  one of the
   following calls to write the CD, depending on whether the disk
   in the drive is a CD-R or a CD-RW. Please replace 'x,x,x' with
   your   writer's  node.  For  further  information,  type  'man
   cdrecord" from a Linux command line.

   If writing to a CD-RW Drive/Disc:

   bash# cdrecord -v blank=fast dev=x,x,x speed=4 mindi.iso (for
   CD-RW)

   If writing to a CD-R Drive/Disc:

   bash# cdrecord -v dev=x,x,x speed=4 mindi.iso (for CD-R)
     _________________________________________________________

Chapter 6. Backup

6.1. Recommandations

     * Shut  down  all  possible applications (this minimizes any
       compare  differences  following  the  backup).  Especially
       shutdown  properly any running database on your system, as
       the recovery may lead to corrupted data.
     * Type:

   bash# mondoarchive

   For  most  users, that should be enough. :-) Mondoarchive will
   usually autodetect your hardware and configure it for you.

   If  you  are a power user (or you like to control every detail
   of  how  Mondo  runs)  then  you  may  want  to  look  at  the
   command-line switches. For example:-

   bash# mondoarchive -Ow9 -gF -I /home

   cdrecord  will  tell you where your CD recorder lives, in SCSI
   terms,   which  looks  like  '0,0,0'.  The  previous  call  to
   mondoarchive  tells  Mondo  to backup everything to a 4x CD-RW
   drive  that has a CD-RW disk in it. (Use -Oc instead of -Ow if
   you are using CD-R.)

   Please  put  the  first  CD-R(W) in the drive now. You will be
   prompted  to  insert  CD  #2  but  you will not be prompted to
   insert  the  first disk. However, if you forget, do not worry:
   if Mondo fails to write the first (or any) disk, it will offer
   to retry, abort or fail.

   Find  the  speed/compression  compromise  that best suits your
   needs. Here maximum (-9) compression level is used.

   If  you  are  using  cron then please consult the chapter that
   Conor Daly has dedicated to that topic
     _________________________________________________________

6.2. Backup Commands and Options

   Backup Command:

   mondoarchive <-option1> <-option2> ... <-optionN>

   E.g.,

   bash# mondoarchive -E "/mnt/dos /mnt/cdrom" -9 -Oc 8

   Would  create  backup  CD  to  a  CD-R  disc  at  the  highest
   compression  level,  writing  at  speed  8  and  ignoring  the
   /mnt/dos and /mnt/cdrom directories.

   To  see a detailed list of switches and their meaning, see the
   HTML man page on the website or type 'man mondoarchive' at the
   console.
     _________________________________________________________

6.2.1. Standard Example With CD-R

   bash# mondoarchive -Oc 2 -g

   Replace   '2'   in   '-Oc  2'  with  the  writer's  speed.  If
   mondoarchive  cannot find your CD-R then please add '-d 0,0,0'
   (or  whatever  your  CD  writer's SCSI node is; usually, it is
   0,0,0) to the call.

   Please  insert  the  first  disk in the writer while the PC is
   chugging  away. If Mondo needs additional CD-R(W) then it will
   ask for them.
     _________________________________________________________

6.2.2. Standard Example With CD-RW

   bash# mondoarchive -Ow 2 -g

   Replace '2' in '-Ow 2' with the writer's speed.
     _________________________________________________________

6.2.3. Standard Example With Tape

   bash# mondoarchive -Ot -d /dev/st0 -g
     _________________________________________________________

6.2.4. Standard Example With Failsafe kernel

   bash# mondoarchive -k FAILSAFE -Ow 2

   If  you  have  problems  during the restore phase, due to your
   kernel  (which may be the case on some distributions), you may
   want  to  explore  the  Failsafe  approach,  In order for this
   option  to work you'll have to get the mindi-kernel tarball or
   package for your distribution.
     _________________________________________________________

6.2.5. Standard Example With Network Backup

   bash# mount 192.168.1.3:/home/nfs -t nfs /mnt/nfs
   bash# mondoarchive -OVn 192.168.1.3:/home/nfs -g -s 200m
   bash# umount /mnt/nfs

   The  resultant  ISO's can be burned to CD's if you want (which
   isn't a good idea unless you're a Mondo expert because they'll
   try  to  restore  over  a  network  by default, which is silly
   because  the  archives are on the CD's). Or, you can boot from
   the  Mindi  floppies  (or mondorescue.iso) and hit ENTER a few
   times to restore.

   Those  ISO images can also be used for a PXE restore. For this
   to  work,  please  refer  to the file README.pxe provided with
   your mindi package.
     _________________________________________________________

Chapter 7. HOWTO run mondo interactively using cron

7.1. Overview

   Mondoarchive  is designed to run interactively (at least where
   media  changes  are  necessary).  Cron  does  not  allow  user
   interaction  with a job. This section addresses the problem by
   using screen as a wrapper for mondo.

   This section is Copyright 2003 Conor Daly.
     _________________________________________________________

7.2. Introduction

   Mondoarchive  is  designed  to  run  interactively. That's not
   strictly  true,  if  you  run  mondoarchive  without  the '-g'
   switch,  it  will  just run. However, there is a problem where
   media  changes  are  necessary. The user must change the media
   and  tell  mondoarchive  that  the  change  has been done. The
   problem  lies  in  the  fact  that  cron  does  not allow user
   interaction with a job. If you schedule a mondoarchive job via
   cron, you better be sure it needs only one media. in practical
   terms,  this  means  using  tapes  or ISOs (if CD-R(W) is your
   backup  medium).  However,  for tape users, there's always the
   possibility  that  the backup will overflow the tape while for
   CD-R(W)  users,  there is the added hassle of burning the ISOs
   in the morning. If your CD_R(W) backup routinely occupies more
   than  one  media,  this is not for you (use the ISO option and
   burn the CDs in the morning). This HOWTO addresses the problem
   by using screen as a wrapper for mondo.
     _________________________________________________________

7.3. Who should read this?

7.3.1. Insurance

   Mondo  users who wish to automate the backup and whose backups
   routinely  occupy close to one media are the best audience. If
   you  backup  to  tape, the occasion will arise when the backup
   will  overflow  your tape. In this instance, mondoarchive will
   ask  for  another  tape.  If  you're  using  cron to start the
   backup,  you  won't be able to tell mondo that the new tape is
   mounted  and  the  backup will fail. If you backup to CD-R(W),
   the same situation will arise but sooner.
     _________________________________________________________

7.3.2. Efficiency

   If  your  backup  already occupies two media, this method will
   allow  as  much  of  the  backup as possible to proceed during
   quiet  periods.  Time  the backup to start wich enough time to
   complete  the  first media shortly before the operator arrives
   for  work.  The  next  media  can  be  mounted  and the backup
   completed  asap  and  minimises  the  time for which users are
   inconvenienced by the backup (eg. database locked...).
     _________________________________________________________

7.4. The Problem

7.4.1. Cron's environment

   When  a user submits a job with cron, their environment is not
   preserved.  This  is  reasonable since cron jobs are typically
   ongoing   and   may   be  adversely  affected  if  the  user's
   environment changes subsequent to the cron submission. Thus, a
   cron  job  should  call  a  script  that  set's up the correct
   environment  before  starting  the user's desired program. The
   'at' command does this nicely.
     _________________________________________________________

7.4.2. Interactivity

   When  a  job  is  started  with  cron, it runs as a background
   process.  No  interaction with the program is possible (unless
   it  is  capable of interacting via a FIFO or some such) except
   termination  via its pid. The only program that I know of that
   allows  such  interaction  and  serves  as a wrapper for other
   prrocesses is 'screen'
     _________________________________________________________

7.4.3. Screen

   There's  one  little problem with screen though. It expects to
   attach  to  a terminal when it first starts. This won't happen
   under cron so screen will fail. Fortunately, screen comes with
   a "start detached" option.
     _________________________________________________________

7.5. The Solution

7.5.1. Briefly

     * Use 'at' to run your usual mondoarchive command
     * Grab the script generated by 'at' and make a copy of it
     * Edit  that  script to use 'screen -m -d <your mondoarchive
       command>'
     * Run that script from your crontab
     * Use  'screen  -r'  to attach to the mondo screen to change
       CDs
     * Use '<CTRL>-a d' to detach the screen again
     _________________________________________________________

7.5.2. In Detail

7.5.2.1. at

   Use  the  'at'  command  to  submit  your  usual  mondoarchive
   command. My mondoarchive command is:

   # mondoarchive -D -Ow 10 -S /home/mondo/ -T /home/mondo/ -g \
   -E "\"/home/cdaly/GIS/W2K /home/mondo/\"" -9

   To submit the mondoarchive command with 'at' do:

   # at now + 5 min mondoarchive -D -Ow 10 -S /home/mondo/ -T
   /home/mondo/ -g \ -E "\"/home/cdaly/GIS/W2K /home/mondo/\"" -9
   <CTRL>-d

   This  generates  a script in /var/spool/at/ which sets up your
   environment  and runs your command. Grab this script to become
   your cron job.
     _________________________________________________________

7.5.2.2. Grab the 'at' script

   Make a copy of the script generated by the 'at' command to use
   as the basis for your cron job.

   grep mondo /var/spool/at/*
   cp /var/spool/at/<file-from-grep> /root/mondo-cronscript

   You'll need to edit this.
     _________________________________________________________

7.5.2.3. Edit mondo-cronscript

   To  use screen, you'll need to edit the cronscript and add the
   screen command. My mondo-cronscript looks like:
#!/bin/sh
# atrun uid=0 gid=0
# mail    cdaly 0 umask 22
PWD=/root; export PWD
XAUTHORITY=/root/.xauthyOrD4f; export XAUTHORITY
HOSTNAME=bofh.irmet.ie; export HOSTNAME
PVM_RSH=/usr/bin/rsh; export PVM_RSH
QTDIR=/usr/lib/qt-2.3.1; export QTDIR
LESSOPEN=\|/usr/bin/lesspipe.sh\ %s; export LESSOPEN
XPVM_ROOT=/usr/share/pvm3/xpvm; export XPVM_ROOT
KDEDIR=/usr; export KDEDIR
USER=root; export USER
LS_COLORS=no=00:fi=00:di=01\;34:ln=01\;36:pi=40\;33:so=01\;35:bd=40\;33
\;01:cd=40\;33\;01:or=01\;05\;37\;41:mi=01\;05\;37\;41:ex=01\;32:\*.cmd
=01\;32:\*.exe=01\;32:\*.com=01\;32:\*.btm=01\;32:\*.bat=01\;32:\*.sh=0
1\;32:\*.csh=01\;32:\*.tar=01\;31:\*.tgz=01\;31:\*.arj=01\;31:\*.taz=01
\;31:\*.lzh=01\;31:\*.zip=01\;31:\*.z=01\;31:\*.Z=01\;31:\*.gz=01\;31:\
*.bz2=01\;31:\*.bz=01\;31:\*.tz=01\;31:\*.rpm=01\;31:\*.cpio=01\;31:\*.
jpg=01\;35:\*.gif=01\;35:\*.bmp=01\;35:\*.xbm=01\;35:\*.xpm=01\;35:\*.p
ng=01\;35:\*.tif=01\;35:; export LS_COLORS
MACHTYPE=i386-redhat-linux-gnu; export MACHTYPE
MAIL=/var/spool/mail/root; export MAIL
INPUTRC=/etc/inputrc; export INPUTRC
BASH_ENV=/root/.bashrc; export BASH_ENV
LANG=en_US; export LANG
LOGNAME=root; export LOGNAME
SHLVL=1; export SHLVL
II_SYSTEM=/usr/local/ingres; export II_SYSTEM
USERNAME=root; export USERNAME
HOSTTYPE=i386; export HOSTTYPE
OSTYPE=linux-gnu; export OSTYPE
HISTSIZE=1000; export HISTSIZE
LAMHELPFILE=/etc/lam/lam-helpfile; export LAMHELPFILE
PVM_ROOT=/usr/share/pvm3; export PVM_ROOT
HOME=/root; export HOME
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass;
export SSH_ASKPASS
PATH=/usr/local/ingres/ingres/bin:/usr/local/ingres/ingres/utility:/usr
/kerberos/sbin:/usr/kerberos/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/loc
al/bin:/usr/local/sbin:/usr/bin/X11:/usr/X11R6/bin:/root/bin; export PA
TH
cd /root || {
echo 'Execution directory inaccessible' >&2
exit 1
}
screen -m -d mondoarchive -D -Ow 10 -S /home/mondo/ \
-T /home/mondo/ -g -E "\"/home/cdaly/GIS/W2K /home/mondo/\"" -9
#done

   The crucial line is this one:

   screen -m -d mondoarchive -D -Ow 10 -S /home/mondo/ -T
   /home/mondo/ -g -E "\"/home/cdaly/GIS/W2K /home/mondo/\"" -9

   This  uses 'screen -m -d' to "-m -d Start screen in "detached"
   mode.  This  creates  a  new session but doesn't attach to it.
   This   is  useful  for  system  startup  scripts.  (From  'man
   screen')"

   When   screen  starts,  it  will  be  in  the  background  and
   "detached".
     _________________________________________________________

7.5.2.4. Run the thing with cron

   To get the whole thing running, do:

   crontab -e

   and add the following lines:

   # run mondoarchive at 23:59 weekdays
   59 23 * * 1-5 /root/mondo-cronscript

   Your mondoarchive job will run at 23:59 monday-friday.

   DON'T FORGET TO CHANGE TAPES!
     _________________________________________________________

7.5.2.5. Getting at it...

   Once your cron job is running regularly, you'll want to get to
   it to change tapes and check status etc.

   screen -r

   attaches to the running screen where you can change CDs etc

   <CTRL>-a d

   detaches the running screen again.
     _________________________________________________________

7.5.2.6. Caveat

   The  script  generated  by  'at' is unique to the user/machine
   combination.  You  MUST regenerate it on each machine where it
   will  be used. Using the one above will NOT work for you. MAKE
   YOUR OWN!
     _________________________________________________________

Chapter 8. Compare

   Before  you trust your backup CD, make sure your BIOS can boot
   CD (and that it is configured to do so).

     * Boot from the first CD.
     * Type:

   LILO: compare

   Follow  the  on-screen  instructions.  This  will compare your
   backup against your original file system.

   FYI,  no bad archives have been created since May 2000. Having
   said  that,  I would still encourage you to run Compare before
   trusting the backups.

   To   view   the   file   differences,   look   at   the   file
   '/tmp/changed.txt'.  Normal differences include logs and other
   dynamic  system  files  that  changed  during  the time of the
   backup  process.  If  only  a few files differ - e.g. files in
   /var,   files  ending  in  '&#732;',  logs,  temporary  files,
   /etc/mtab,  /etc/adjtimex  -  then  you  know the archives are
   good.  Your logs will change over time, too. Bear in mind that
   a  difference  between  the  backup  and  the  live  copy does
   not indicate  a  flaw  in Mondo. It indicates that you or your
   filesystem  changed the files, so the backup is no longer 100%
   up  to  date.  However, that is inevitable, as your filesystem
   changes  from  moment  to  moment (which is why you back it up
   regularly).
     _________________________________________________________

Chapter 9. Restore

9.1. Overview

   I hope you don't have to restore from scratch very often. It's
   nerve-wracking  until  you realize that Mondo's restore engine
   is very reliable.

   If  you  find  that  you cannot make your PC boot from the CD,
   take  heart:  the  first backup CD of each set contains floppy
   disk  images  to  give  you  the  same functionality as the CD
   (minus  the  archives,  of course) on floppies. Remember, your
   Mondo  CD  is a fully functional CD-based mini-distribution as
   well as a recovery CD.

   You can choose from the following modes:

   Interactive
          Restore  step-by-step,  or  restore  a  subset  of  the
          archives.  This is the method you should mainly use for
          your recovery needs.

   Nuke
          Wipe  your drives and restore everything, automatically
          and  unattended.  Warning:  This  does  exactly what is
          says, so be carefull using it.

   Expert
          Boot  to  a  shell  prompt.  If you want to do anything
          creative, you should boot into Expert Mode. It's called
          expert, I think that says it all.

   If  the  CD  is  not  found during the initial restore CD boot
   attempt,  reboot  the  PC  a  second  time  prior to reporting
   failure. Occasional timing errors and hardware/software/system
   conflicts do occur.
     _________________________________________________________

9.2. Tips and Tricks

   Ideally, restore your system to a spare hard drive to test the
   integrity  and  reliability  of your disks. To do that, either
   edit  your  mountlist  to make the devices point to your spare
   hard drive, or swap your hard drive cables between boots.

   At  a  bare  minimum, compare your CD against your file system
   before you decide whether to trust them.

   To  test  Mondo's  ability  to  handle  your LILO or GRUB boot
   loader and accompanying configuration file:

     * Boot from the backup CD into Expert Mode
     * Type:

   bash# mondorestore --mbr

     * To fix any mess it made (not that it should) type:

   bash# mount-me
   bash# chroot /mnt/RESTORING

   bash# lilo OR grub-install '(hd0)'
   bash# exit
   bash# unmount-me

     * If it did not work then please copy /tmp/mondo-restore.log
       to  a floppy (or to your hard disk, USB key, ...), gzip it
       and e-mail it to the mondorescue mailing list.
     _________________________________________________________

9.2.1. Barebones (Nuke) Restore

   Imagine that your hard drives happen to be wiped, deliberately
   or  accidentally.  Or,  imagine  that  you  want to clone your
   existing  operating system. In either case, you want to run in
   Nuke Mode.

   If  you  want to wipe everything and restore your whole system
   from CD, please:

     * Use the -H option when invoking mondoarchive
     * Boot from the first Mondo CD
     * Press RESTORE<enter>
     * Insert the subsequent CD when asked
     * Watch the screen for errors

   That's  it.  The  restoration process for tape or NFS users is
   similarly  easy:  just boot, answer the on-screen prompts, and
   wait.

   Now,  should  something  go wrong, you will be able to examine
   /tmp/mondo-restore.log  to see what happened. All is not lost.
   You  can  fdisk  and  the partitions yourself, using the tools
   that  come  with  the  CD.  You  can  then run mondorestore in
   Interactive  Mode and say 'no' when asked if you want Mondo to
   partition/ your drives.

   If  you  want  to  see exactly what Mondo is doing while it is
   restoring,  press <Alt><left cursor> to view its logfile, in a
   virtual console, scrolling past.
     _________________________________________________________

9.2.2. Interactive Restore

   Interactive  Mode is for people who have lost a subset of data
   from  their  live  file  system, or perhaps who have lost some
   data  from their latest backup and want to restore a subset of
   data  from an earlier backup. If you want to restore only some
   files  or  if  you  do not want to prep/ your drives, then you
   should  boot  into Interactive Mode. The interactive mode will
   provide an 'Editing mountlist screen' that allows you to setup
   a different disk geometry.

   To  move  up  and  down  between  partitions  in  the 'Editing
   mountlist screen', use the Up and Down arrows. To move between
   the  main  window  and the buttons at the bottom, use the Left
   and  Right  cursor keys. TAB shifts focus from one screen item
   to the other in a haphazard fashion, owing to the complexities
   of the Newt library.

   If  you  want  to  restore selectively, just press <enter> and
   follow  the  on-screen  instructions. You will be asked to say
   yes/no to a range of questions.

   If  you are planning to modify your partition table, you would
   do  well  to  read  up  on the partition layout and the use of
   fdisk,  it  gives  you  some  pointers  on how to best lay out
   partitions.  You can find a good guide at http://www.ibiblio.o
   rg/pub/Linux/docs/HOWTO/mini/Partition/index.html

   If you want to restore a subset of the backup then:

     * Boot from the CD
     * Type:

   bash# interactive

     * Then, after booting, answer the questions as follows:

   Do you want to partition your devices? no
   Do you want to them? no
   Do you want to restore everything? no
   Do you want to restore something? yes
   Which path do you want to restore? /mydata [e.g.]
   Do you want to run LILO to setup your boot sectors? Yes
     _________________________________________________________

9.2.3. Expert Restore

   If  you are planning to modify your partition table, you would
   do  well  to  read  up  on the partition layout and the use of
   fdisk, it gives you some could pointers on how to best lay out
   partitions.  You can find good a guide at http://www.ibiblio.o
   rg/pub/Linux/docs/HOWTO/mini/Partition/index.html

   To restore manually, please:

     * Boot from the first CD, then type:

   bash# expert

     * Then  do whatever you like. :) You may type the following,
       of course:

   bash# mondorestore
     _________________________________________________________

9.2.4. Modified partitions - Restore to a different disk geometry

   One  of  the  nice things about Mondo is that it lets you wipe
   your  existing  system  and  restore it in any layout you like
   (within  reason).  You  can move from non-RAID to RAID,install
   and  utilize  additional  drives,  move from ext2 to ReiserFS,
   etc., all without risking the loss of data.

   If  the  user  excluded a particular partition from backup and
   specifically  excluded  it  from the mountlist itself using -E
   then   Mondo   will   insert   a  small  (32MB)  partition  at
   restore-time,  in  order  to avoid having to re-jig fstab, the
   partition table, etc.

   To do this:

     * Boot into Expert Mode, then type:

   bash# mondorestore

     * (edit the mountlist using the on-screen editor)

   If  you want to move from ext2 to ReiserFS, you can do it here
   (so long as your kernel supports ReiserFS). Ditto for XFS, JFS
   or ext3.

   Mondorestore  will  try  to  modify your /etc/fstab to reflect
   changes  you  have made to the mountlist. If you are not using
   LILO, you can still create your own
   /mnt/RESTORING/etc/lilo.conf and run lilo -r /mnt/RESTORING to
   configure your boot sectors and Master Boot Record.

   Mondo  (technically,  Mindi on behalf of Mondo) creates a file
   called  a  mountlist.  This  can  be  found  on the ramdisk at
   /tmp/mountlist.txt; it looks something like this:

   /dev/hda1 /mnt/windows vfat 4096000
   /dev/hda5 / reiserfs 6023000
   /dev/hda6 /tmp xfs 955000
   /dev/hda7 /usr ext3 4096000

   It  is fairly easy to understand the list. Each line refers to
   a single device/partition. The line is:

   <device> <partition> <> <Kilobytes>

   If  you  have added a hard drive and want to take advantage of
   the  additional  space, you could amend the above mountlist to
   read:

   /dev/hda1 /mnt/windows vfat 6096000
   /dev/hda5 / reiserfs 9123000
   /dev/hda6 /tmp xfs 955000
   /dev/hdb1 /usr ext3 8192000
   /dev/hdb2 /home xfs 8192000

   This  assumes that your old hard drive is /dev/hda and the new
   hard drive is /dev/hdb.

   Or, if you want to add RAID support, create a new /etc/raidtab
   on  the  ramdisk (which is beyond the scope of this HOWTO) and
   then write a mountlist like this:

   /dev/hda1 /mnt/windows vfat 6096000
   /dev/md0 / reiserfs 9123000
   /dev/md1 /tmp xfs 955000
   /dev/md2 /usr ext3 8192000
   /dev/md3 /home xfs 8192000

   So   long  as  your  /etc/raidtab  file  is  sane,  Mondo  can
   automatically  partition and your disks for you, including the
   RAID devices.

   Once   you  have  finished  editing  /tmp/mountlist.txt  using
   mondorestore's  built-in  editor  then  you  may  choose 'OK'.
   Please  note  that  this  will not write anything to your hard
   disk.  You will only reformat or repartition your disks if you
   say 'Yes' when asked if you want to do those things.
     _________________________________________________________

9.2.5. Advanced

   It  is  now  possible  to  restore  to a live filesystem using
   Mondo.  In  other  words, you do not have to boot your PC from
   your CD/floppy in order to restore files. Mondo was originally
   designed  for  disaster  recovery  -  situations  in which you
   cannot boot your PC. If you can boot your PC, it is not really
   a  disaster,  is  it?  :)  Well,  if  you  have wiped out your
   priceless collection of "MTV's Bjork Unplugged" MP3's, perhaps
   it is. Anyway, just type this as root

   bash# mondorestore

   Choose your type of backup media. The live restoration process
   is very similar to what you'll experience if you type
   mondorestore with no parameters after booting from a Mondo
   CD/floppy.
   Hit 'OK' when you have inserted the tape/CD. If you generated
   a tape backup, the tape itself should be enough. If you
   generated a CD backup, the first CD should be enough.
   Otherwise, you may need the boot floppy.
   Flag the files and directories you wish to restore. Use the
   'More' and 'Less' buttons to open and close subdirectories.
   Specify the location to restore the files to. In general, '/'
   is appropriate. If you do not want to overwrite newer versions
   of the files you are restoring then specify /tmp/BKP or
   similar as the restore path.
   Mondorestore will retrieve configuration information from the
   media. (The sample screen is for tape users. CD users will see
   something different.)
   Data will be restored to the hard disk - first the regular
   files, then any big (32MB or greater) files in the restore
   set.

   I hope this manual is proving to be useful to you.
     _________________________________________________________

Chapter 10. FAQ

10.1. Overview

   Are    the    errors    from   Mindi   or   Mondo?   Look   at
   /var/log/mondo-archive.log,    /var/log/mindi.log    or    the
   mondo.err.xxxxx.tgz  log indicated by the screen message. Pipe
   screen errors which relate to the creation of boot disk(s) and
   or data disk(s) to a text file.

   See  the  MondoRescue  for details. If you are going to e-mail
   mondorescue  mailing  list  then  please attach that text file
   (zipped!) and give :

     * Your kernel version
     * Your Linux distro's name and version
     * Whether your kernel supports initrd and loopfs; it should!
     * What  sort  of  PC  you  are  using,  including  hard disk
       configurations

   Mondo  is  freely available under the GPL and you are given it
   for  no  charge. When you e-mail the mondorescue mailing list,
   please bear that in mind.
     _________________________________________________________

10.2. General Questions

   10.2.1. Q: What is "Mindi"?
   10.2.2. Q: Why is it called "Mondo"?
   10.2.3. Q: Mondo does not work on my system. It keels over and
          dies. What's wrong?

   10.2.4. Q: What if the error is in Mindi?
   10.2.5. Q: Can I trust Mondo?
   10.2.6. Q: How do I report a bug?
   10.2.7. Q: I think Mondo should (...insert suggestion here...)
          and I have rewritten it accordingly. Would you like to
          see my patch?

   10.2.8. Q: I think Mondo should (...insert suggestion
          here...); will you incorporate this feature for me,
          please?

   10.2.9. Q: Mondo says, "XXX is missing," and then terminates.
          What's wrong?

   10.2.10. Q: Can Mondo handle multi-CD backups and restores?
   10.2.11. Q: Can Mondo handle Linux/Windows dual-boot systems?
   10.2.12. Q: Can Mondo backup Windows-only systems?
   10.2.13. Q: Does Mondo support LVM?
   10.2.14. Q: What if I don't use LILO? What if I use GRUB?
   10.2.15. Q: I get the error, 'Cannot find /tmp/dev.0' or
          'Cannot mount device 0x0701'; what do I do?

   10.2.16. Q: Can I create a Mondo CD and then use it to create
          an archive of any OS on any PC?

   10.2.17. Q: Why do you insist on putting floppy disk images on
          Mondo CD? They waste space and I never use them. The CD
          works just fine, so why keep the floppy disk images?

   10.2.18. Q: Why doesn't the Mondo project have a cool-looking
          animal logo?

   10.2.19. Q: Is there a Mondo user 'Code of Conduct?

   10.2.1. Q: What is "Mindi"?

   A:  Mindi,  a.k.a. Mindi-Linux, makes a mini-distribution from
   your  kernel,  modules,  modules,  tools and libraries. It can
   also  generate an El Torito 2.88/5.76MB boot disk image. Mondo
   uses  Mindi  to  create  a mini-distro, then boots from it and
   runs on it.

   10.2.2. Q: Why is it called "Mondo"?

   A:  The  Teenage Mutant Ninja Turtles described cool things as
   'mondo'.  Hugo  Rabson  wasn't sure what to call this project.
   'Faust'  was  one  idea  he had, partly as a dig at his former
   boss  who practically owned him because of his legal status at
   the   time.   In   the  end,  He  chose  something  short  and
   distinctive.

   10.2.3. Q: Mondo does not work on my system. It keels over and
   dies. What's wrong?

   A:  It  works  on Red Hat 7.x/8/9, RHEL 2.1/3/4, Mandrakelinux
   8.x/9.x/10.x,  Debian  3.0,  most  flavors  of SuSE/SLES, some
   flavors  of Slackware, etc. The more distributions we support,
   the  more  moving  targets we have to hit. Please bear this in
   mind  when e-mailing the list. :) If you would like to help us
   by  beta-testing  Mondo (or Mindi) on your PC then we would be
   very  interested  in  working  with  you  to  work  around the
   eccentricities  of  your  Linux distro. However, rest assured,
   90%  of  the  bugs  reported are actually symptoms of FooLinux
   X.Y's unique way of doing things.

   Please  send  a  copy  of  /var/log/mondo-archive.log  to  the
   mondorescue  mailing  list  along  with  a description of your
   distro,  your  kernel,  etc. Oh, and before sending it, please
   try to read it.

   10.2.4. Q: What if the error is in Mindi?

   A: Please send a copy of /var/log/mindi.log to the mondorescue
   mailing  list  along  with  a description of your distro, your
   kernel,  etc. Oh, and before sending it, please read it asit's
   much easier to understand it.

   10.2.5. Q: Can I trust Mondo?

   A:  Mondo has generated reliable archives since May 2000. Lost
   data  occured  by using bad CD-R disks and not verifying their
   contents.  Some  users  have  not  tried booting from their CD
   until  crunch  time.  Remember  to  boot  into Compare Mode to
   verify  the backup before you trust it. If Mondo did not work,
   you  would  not  be reading this. If it does not work for you,
   your kernel is usually the culprit. Check Linux Kernel support
   to see what your kernel should support. Please e-mail the list
   if you need some help with this.

   10.2.6. Q: How do I report a bug?

   A:   E-mail   the  bug  report  (mondo.err.xxxxx.tgz)  to  the
   mondorescue  mailing  list. Ok you've read it already but it's
   really important if you want help. If you don't send a logfile
   then  there  isn't  a  lot  that  we can do for you, so PLEASE
   include a logfile at the very least.

   10.2.7. Q: I think Mondo should (...insert suggestion here...)
   and  I have rewritten it accordingly. Would you like to see my
   patch?

   A:  Absolutely! :-) The best way for you to make Mondo do what
   you want is to modify it and then send the patch. That way, we
   can all benefit.

   10.2.8.   Q:   I  think  Mondo  should  (...insert  suggestion
   here...); will you incorporate this feature for me, please?

   A:  please  enter  the  suggestion  in  our  feature system at
   MondoRescue

   10.2.9.  Q: Mondo says, "XXX is missing," and then terminates.
   What's wrong?

   A:  A  good  Linux  distribution  should  contain  XXX but the
   designers,  in  their  infinite wisdom, decided not to include
   that particular tool. Check Related Linux Packages and install
   the    missing   package.   If   that   fails,   contact   the
   vendor/distributor/manufacturer/designer of your distro.

   10.2.10. Q: Can Mondo handle multi-CD backups and restores?

   A: Yes, up to twenty CD per set. This 20-CD limit results from
   laziness on mondorescue's part. I'll be removed in the future.
   However,  if  your  system  occupies more than 20 CD, may it's
   time for another type of media ?

   10.2.11. Q: Can Mondo handle Linux/Windows dual-boot systems?

   A:  Yes.  If your system currently boots into Linux or Windows
   via  LILO,  you  can  backup and restore both OSes at the same
   time  using  Mondo. If you are using NTFS then add the switch,
   '-x <device>'.

   10.2.12. Q: Can Mondo backup Windows-only systems?

   A: Not at the moment.

   10.2.13. Q: Does Mondo support LVM?

   A:  Mondo  supports LVM v1 and v2. Mondo backs up and restores
   your  existing  setup  but it does not make it easy for you to
   change your LVM configuration, at the moment. You have to edit
   /tmp/i-want-my-lvm at boot-time to do that.

   10.2.14. Q: What if I don't use LILO? What if I use GRUB?

   A: GRUB is supported by Mondo.

   10.2.15.  Q:  I  get  the  error,  'Cannot find /tmp/dev.0' or
   'Cannot mount device 0x0701'; what do I do?

   A:  Please free up /dev/loop0 using 'losetup /dev/loop0 -d' to
   unmount that loop device. If your OS will not let you do that,
   contact your local support group or Linux vendor.

   10.2.16.  Q: Can I create a Mondo CD and then use it to create
   an archive of any OS on any PC?

   A: Not yet. You can use Mondo to backup Linux or Linux/Windows
   dual  boot.  One  day, Mondo will let you backup partitions it
   can't  read  or  write, by treating each partition as one long
   file  to  be  backed up. This file will be chopped, compressed
   and archived like any other big file.

   10.2.17. Q: Why do you insist on putting floppy disk images on
   Mondo  CD? They waste space and I never use them. The CD works
   just fine, so why keep the floppy disk images?

   A:  Because.  It  helped  us in the past. If you really, truly
   want  them  gone  then  please  submit  a  patch  to make them
   optional.

   10.2.18.  Q: Why doesn't the Mondo project have a cool-looking
   animal logo?

   A:  Excellent  question!  Please  submit graphics of candidate
   animal logos!

   10.2.19. Q: Is there a Mondo user 'Code of Conduct?

   A:  Yes.  Read  the HOWTO. Submit patches. Recommend realistic
   improvements.  Be  courteous  to other users on the discussion
   list. Do not whine.
     _________________________________________________________

10.3. Booting and Kernel related Questions

   10.3.1. Q: When I try to boot from the Mondo CD, it says,
          "VFS: Unable to mount root fs." I am using an old
          Debian distro. What do I do?

   10.3.2. Q: When I try to boot from the Mondo CD, it says,
          "Cannot mount root fs - kernel panic," or something
          similar. What do I do?

   10.3.3. Q: When I try to boot from the Mondo CD, it says,
          "UPGRADE YOUR RAM". What does that mean?

   10.3.4. Q: When I try to boot from the Mondo CD, it says
          something about not finding my CD-ROM drive and then it
          blames the kernel. What does that mean?

   10.3.5. Q: The Mondo CD/floppy takes ages to boot. How can I
          speed it up?

   10.3.6. Q: I made a Mondo CD using the failsafe kernel (i.e. I
          said 'no' when Mondo asked if I wanted to use my own
          kernel). It still doesn't boot. Help!

   10.3.7. Q: What if my PC won't boot from a CD?
   10.3.8. Q: But why won't Mondo boot from my CD? It says my
          kernel is flawed/outdated/ whatever, and when I wrote
          to the ML, they told me the same thing... but I still
          don't get it. I mean, my kernel works for everything
          else. Why not Mondo?

   10.3.9. Q: Why do I only need a boot disk if I'm using a tape
          drive? Where are the data disks?

   10.3.10. Q: Why does it say, "Process accounting FAILED" when
          I reboot?

   10.3.11. Q: Why does it say,
          &#8220;request_module[block-major-1]: Root fs not
          mounted VFS: Cannot open root device "100" or 01:00
          Please append a correct "root=" boot option kernel
          panic: VFS: Unable to mount root fs on 01:00&#8221;
          when i boot from the CD?

   10.3.12. >Q: How do i copy boot+data disk images to physical
          floppy disks ?

   10.3.13. Q: My tape drive doesn't play nicely with Mondo at
          boot-time. What do I do?

   10.3.1.  Q:  When  I  try  to boot from the Mondo CD, it says,
   "VFS:  Unable  to  mount  root  fs."  I am using an old Debian
   distro. What do I do?

   A:  Ask Debian's designers why they, unlike every other distro
   I  can  find,  have  included  cramfs and other 'goodies' with
   their  kernel.  In  the  meantime, please use '-k FAILSAFE' in
   your command line when calling Mondo.

   A:  From  Sarge  onwards,  all stock Debian 2.6 kernels should
   work  fine.  If  you are still using stock Debian 2.4 kernels,
   FAILSAFE  is  the  way  to go. Of course, if you have compiled
   your  own  kernel and experience problems, FAILSAFE is the way
   to go as well, but this is not really Debian-specific.

   10.3.2.  Q:  When  I  try  to boot from the Mondo CD, it says,
   "Cannot  mount  root fs - kernel panic," or something similar.
   What do I do?

   A:  Recompile  your kernel (or use '-k FAILSAFE'). Take a look
   at  Linux  Kernel  support  to  see  what  you're  kernel must
   support.

   10.3.3.  Q:  When  I  try  to boot from the Mondo CD, it says,
   "UPGRADE YOUR RAM". What does that mean?

   A:  Recompile  your  kernel and add Virtual memory file system
   support.  Take  a  look  at  Linux  Kernel support to see what
   you're  kernel  must  support. (Of course, if your PC has less
   than  64MB  of  RAM,  you could always... what's the phrase? I
   know, upgrade your RAM!)

   10.3.4.  Q:  When  I  try  to  boot from the Mondo CD, it says
   something about not finding my CD-ROM drive and then it blames
   the kernel. What does that mean?

   A:  Your  kernel  must  support  initrd,  loopfs, IDE|SCSI|USB
   CD-ROM's, and ramdisks. Take a look at Linux Kernel support to
   see  what  you're kernel must support. If your kernel does not
   support  these  things,  Mondo  will  not  boot  from your CD.
   However,  when  running  Mindi,  you  may  choose to use _its_
   kernel  instead  of  your  own. In addition, you may boot from
   floppy  disk  images instead the CD: copy the disk images from
   the  CD  /images directory to floppy disks, using 'dd'. Take a
   look at Copy boot data disks on how to make those.

   10.3.5.  Q:  The Mondo CD/floppy takes ages to boot. How can I
   speed it up?

   A:   Edit   mindi  (it's  a  shell  script,  btw)  and  change
   LILO_OPTIONS=""   to   LILO_OPTIONS="-c".   This  enables  map
   compaction  in  lilo  and speeds up booting, for more info see
   the lilo man page.

   10.3.6. Q: I made a Mondo CD using the failsafe kernel (i.e. I
   said  'no' when Mondo asked if I wanted to use my own kernel).
   It still doesn't boot. Help!

   A:  OK,  now that is a bug. :-) I included a kernel with Mondo
   (technically,  with Mindi, which Mondo uses) to make sure that
   users  could  use Mondo despite flaws in their own kernels. If
   you  are using Mondo/Mindi's kernel but still cannot boot from
   your Mondo CD then please e-mail the mondorescue mailing list.

   10.3.7. Q: What if my PC won't boot from a CD?

   A:  Copy  the image files from the CD /images directory, using
   the  dd command. Take a look at Copy boot data disks on how to
   make those. Then boot from the first floppy; follow it up with
   the  data  disks;  finally,  type  'mount /mnt/cdrom' and then
   utilize the restore script as usual, e.g. mondorestore.

   A:  You may also want to boot using the network with PXE. Look
   at the README.pxe file of mindi to know more details on how.

   10.3.8.  Q:  But  why  won't Mondo boot from my CD? It says my
   kernel  is  flawed/outdated/ whatever, and when I wrote to the
   ML, they told me the same thing... but I still don't get it. I
   mean, my kernel works for everything else. Why not Mondo?

   A:  Because  Mondo  makes a boot disk using your kernel. I bet
   your other software doesn't do that. Also, not all kernels are
   suitable  for  boot  disks. I'm sorry but that's Life. Upgrade
   your  kernel  and/or recompile it. Take a look at Linux Kernel
   support to see what you're kernel must support.

   10.3.9.  Q: Why do I only need a boot disk if I'm using a tape
   drive? Where are the data disks?

   A:  On  the  tape.  :-) The first 32MB of the tape will be set
   aside for a large tarball containing the data disks, a list of
   all files backed up, and other sundries. If Mondo and Mindi do
   their respective jobs then you won't need additional floppies,
   just the boot floppy and the tape(s).

   For  the  moment  mondorescue  doesn't support OBDR for tapes.
   Feel free to produce patches for it :-)

   10.3.10.  Q: Why does it say, "Process accounting FAILED" when
   I reboot?

   A:  You  were  using Process Accounting. Red Hat (or whichever
   distro  you  are  using)  does  not provide a startup/shutdown
   script  yet.  So,  when  you try to backup the process log, it
   just  grows  and  grows  as  Mondo  tries to back it up. Mondo
   doesn't  back  it  up  anymore and that's why. The unfortunate
   side-effect  is...  well,  what  you  see on your screen. Type
   'touch  /var/log/pacct'  and  then  'paccton' to fix the error
   message.

   10.3.11. Q: Why does it say,
   &#8220;request_module[block-major-1]: Root fs not mounted VFS:
   Cannot open root device "100" or 01:00 Please append a correct
   "root=" boot option kernel panic: VFS: Unable to mount root fs
   on 01:00&#8221; when i boot from the CD?

   A:  Recompile  your kernel and add initrd support. Take a look
   at Linux Kernel supportto see what you're kernel must support.

   10.3.12.  >Q:  How do i copy boot+data disk images to physical
   floppy disks ?

   A:  The  images  are  in  /root/images/mindi (even if they are
   created  by  Mondo)  and also in the 'images' directory on the
   first  CD of your backup set, if you have backed up to CD. You
   can copy the images to disk as follows:-

   Put an empty Boot floppy
   bash# fdformat /dev/fd0u1722
   bash# dd if=/root/images/mindi/mindi-boot.1722.img
   of=/dev/fd0u1722
   Put an empty Data floppy
   bash# fdformat /dev/fd0
   bash# dd if=/root/images/mindi/mindi-data-N.img of=/dev/fd0
   Replace N with 1, 2, etc.

   10.3.13.  Q:  My  tape drive doesn't play nicely with Mondo at
   boot-time. What do I do?

   A:  Play with 'mt'. Use its setblksize and defblksize switches
   to  reconfigure your tape drive if necessary. Some tape drives
   just  are  painful. If yours is one of them then God help you.
   Mondo  can  handle any tape drive whose drive and firmware can
   handle  fopen(),  fwrite(),  fread()  and fclose(). Mondo uses
   standard  C  libraries  to talk to your tape streamer. If your
   tape  streamer  can't  handle  that then you had better call a
   priest. Either that or ask for a refund.
     _________________________________________________________

10.4. Installation related Questions

   10.4.1. Q: Why do I get, "newt.h not found," or "popt.h not
          found," several times when I try to install Mondo?

   10.4.2. Q: Newt won't compile when I try. What's the problem?
   10.4.3. Q: I've just used up 6 CD-R, only to find that Mondo
          won't boot!

   10.4.4. Q: Lots of packages, required by Mondo, are missing
          from my system. What do I do?

   10.4.1.  Q:  Why  do I get, "newt.h not found," or "popt.h not
   found," several times when I try to install Mondo?

   A: You have not installed libnewt and/or libnewt-devel. Please
   do so. Check Related Linux Packages to see what Mondo requires
   and  where  you  can get tarballs and RPM's. Make sure you are
   using  the  right  version  of  newt/libnewt.  Read  the error
   messages carefully.

   10.4.2. Q: Newt won't compile when I try. What's the problem?

   A:  You  are  probably  missing  popt.h,  which  newt needs to
   compile,  it  can  be  found in the 'popt' package. Check your
   distribution  and  see if they have popt, if not check Related
   Linux Packages to see where you can get it.

   10.4.3.  Q:  I've just used up 6 CD-R, only to find that Mondo
   won't boot!

   A:  You  should  have  used  CD-RW.  ;) In the HOWTO, it gives
   instructions on how to create a test CD (one, not six).

   10.4.4.  Q:  Lots  of packages, required by Mondo, are missing
   from my system. What do I do?

   A: Install them. :) If you are using RPM or deb then you'll be
   told  which  packages  you  need.  Mondo offers a lot of those
   packages on its Download web page.
     _________________________________________________________

10.5. Hardware related Questions

   10.5.1. Q: Can Mondo handle CD-RW?
   10.5.2. Q: Does Mondo support tape drives?
   10.5.3. Q: Does Mondo support my tape drive?
   10.5.4. Q: How do I copy the floppy images from the CD to
          floppy disks?

   10.5.5. Q: Sometimes, my laptop won't mount Mondo CD properly,
          or something. Umm...

   10.5.6. Q: Does Mondo support Hardware RAID?
   10.5.7. Q: Where is my CD burner, in SCSI terms?
   10.5.8. Q: Can Mondo handle SCSI devices?
   10.5.9. Q: Why doesn't cdrecord -scanbus work ?

   10.5.1. Q: Can Mondo handle CD-RW?

   A: Yes. Use '-Ow <speed> <device>' to make it work.

   10.5.2. Q: Does Mondo support tape drives?

   A: Yes. See above.

   10.5.3. Q: Does Mondo support my tape drive?

   A:  If  your  tape drive and its firmware and the kernel-level
   driver  support  fopen(),  fread(),  fwrite()  and  fclose() -
   standard  C library calls - then yes, Mondo should support it.
   If  not,  well,  you need a refund. :) Mondo plays nicely with
   any sane, sensible drives. That's most of them, by the way. :)
   If  your drive doesn't play nicely with Mondo then you may try
   tinkering  with  setblksize  and  defblksize  using  'mt',  or
   tweaking  Mondo's  block  size  by  recompiling  it  with make
   INTTAPE=4096  or  INTTAPE=8192  or something. Other than that,
   you need a priest or a refund.

   10.5.4.  Q:  How  do  I  copy the floppy images from the CD to
   floppy disks?

   A:  Mount  the  CD-ROM,  e.g.  at  /mnt/cdrom.  Insert a blank
   floppy. Type:

   bash# cd /mnt/cdrom/images
   bash# dd if=mindi-boot.1722.img of=/dev/fd0u1722

   Insert another blank floppy and type:

   bash# dd if=mindi-data-1.img of=/dev/fd0u1722

   Do the above for each 'mindi-data' disk image.

   10.5.5. Q: Sometimes, my laptop won't mount Mondo CD properly,
   or something. Umm...

   A:  Please  insert  the  CD, close the CD-ROM tray, wait a few
   seconds  and  then press Enter to acknowledge insertion of the
   next  CD.  Your laptop is on crack and is sucking a little too
   hard on the pipe.

   10.5.6. Q: Does Mondo support Hardware RAID?

   A:  Yes. You may backup and restore RAID systems. You may also
   backup  a  non-RAID system and restore as RAID (or vice versa)
   by  using  the mountlist editor to edit your RAID and non-RAID
   partitions  and their settings. Mondo will do the partitioning
   and formatting for you.

   Tested  Raid  controllers  includes  all  those  showind  only
   classical  devices  such  as  /dev/sdx,  and  SmartArray cciss
   controllers.

   10.5.7. Q: Where is my CD burner, in SCSI terms?

   A: Type:

   bash# cdrecord -scanbus

   Find  your CD burner's device# (e.g. '0,0,0'). Call Mondo with
   the switch '-Oc <speed>' -d '<device>'. Or, if you feel lucky,
   just  use  '-Oc 2'; Mondo will (a) assume you want to write at
   4x to a CD-R and (b) will do its best to find your CD burner.

   10.5.8. Q: Can Mondo handle SCSI devices?

   A: Mondo should be able to handle almost any hardware. So long
   as  your  kernel and modules support it, Mindi will support it
   and therefore so will Mondo.

   10.5.9. Q: Why doesn't cdrecord -scanbus work ?

   A:  If  you  have  a  2.4.x kernel (typical example are fedora
   legacy kernels for redhat 7.X/8/9) and an IDE CDRW device, and
   the drive is not listed when you run

   bash# cdrecord -scanbus

   try  adding the following kernel option to your boot script to
   enable  SCSI  emulation:  hdx=ide-scsi,  where "hdx" should be
   replaced with the appropriate drive letter of the CDRW device,
   e.g.,   "hdc".   (Answer  provided  by  Christopher  Moriarity
   cdm7_at_cdc.gov)
     _________________________________________________________

10.6. Backup related Questions

   10.6.1. Q: Mondo says, 'Cannot run mindi --makemountlist' and
          aborts. What do I do?

   10.6.2. Q: Can Mondo burn CD as they are created?
   10.6.3. Q: Mondo failed to burn my CD. It said something like,
          "Error CDB A1 01 02 53 ..." and so on. What does that
          mean?

   10.6.4. Q: May I backup my system with one partition layout
          and restore with another?

   10.6.5. Q: Why does Mondo need so much free disk space?
   10.6.6. Q: I am trying to do something clever, e.g. write my
          ISO's to an NFS mount, and I get some weird error
          messages. What do I do?

   10.6.7. Q: Can Mondo backup to data files on another
          partition, e.g. an NFS mount?

   10.6.8. Q: Can Mondo backup _to_ an NFS partition, i.e. backup
          over a network? How about restoring?

   10.6.9. Q: Does Mondo handle System or Hidden attributes when
          archiving Dos/Win files?

   10.6.1.  Q: Mondo says, 'Cannot run mindi --makemountlist' and
   aborts. What do I do?

   A:  Look at /var/log/mindi.log and see what it says. Also, try
   typing  'mindi --makemountlist /tmp/mountlist.txt' to see what
   Mindi  says.  Send  the log to the mondorescue mailing list if
   you get stuck.

   10.6.2. Q: Can Mondo burn CD as they are created?

   A:  Yes.  Use  the '-Oc <speed>' switch. Use a negative number
   for a dummy burn.

   10.6.3. Q: Mondo failed to burn my CD. It said something like,
   "Error CDB A1 01 02 53 ..." and so on. What does that mean?

   A:  Cdrecord reported some serious errors while trying to burn
   your CD. Check your CD burner, your CD-R and your kernel.

   10.6.4.  Q:  May  I backup my system with one partition layout
   and restore with another?

   A:  Yes. Boot in Interactive Mode and edit the mountlist using
   the  snazzy new mountlist editor. Mondo can now edit your RAID
   partitions  for  you.  Just  open  /dev/md0  (or whatever) and
   select "RAID.." to start. Or, to add a RAID device:

     * Add two or more partitions, of type and mountpoint 'raid'
     * Add device '/dev/md0' and click OK
     * Follow the prompts and your own common-sense :)

   10.6.5. Q: Why does Mondo need so much free disk space?

   A:  Because  it  need  space  to create the archive files with
   afio, then again space to create the ISO images that you'll be
   able to burn.

   10.6.6.  Q:  I am trying to do something clever, e.g. write my
   ISO's  to  an  NFS mount, and I get some weird error messages.
   What do I do?

   A:  Well, (a) use '-T /tmp' or '-T /home' or something in your
   call to Mondo. Oh, and (b) check the /etc/exports file on your
   NFS  server and verify the exported filesystem is writable for
   the client, and relaunch exportfs -a.

   10.6.7.   Q:  Can  Mondo  backup  to  data  files  on  another
   partition, e.g. an NFS mount?

   A: Yes. Just backup as usual but add '-d /mnt/nfs' or wherever
   your  partition  is  mounted; don't use '-Oc' or '-Ot' at all;
   just  '-Oi  -d  /root'.  Then, after booting from the floppies
   which Mondo generates, you need to type 'ISO' at the console.

   10.6.8. Q: Can Mondo backup _to_ an NFS partition, i.e. backup
   over a network? How about restoring?

   A: Yes. Use '-On <mount> <directory>'. Example:

   bash# mondoarchive -On 192.168.1.3:/home/nfs

   10.6.9.  Q: Does Mondo handle System or Hidden attributes when
   archiving Dos/Win files?

   A: No. It probably never will, either. Sorry.
     _________________________________________________________

10.7. Compare related Questions

   10.7.1. Q: When I compare my archives to my file system, Mondo
          tells me there are differences or errors. Are the
          archives bad?

   10.7.1. Q: When I compare my archives to my file system, Mondo
   tells  me  there  are  differences or errors. Are the archives
   bad?

   A: Look at /tmp/changed.files; if the files are logfiles, temp
   files  or  files which you think you may have changed recently
   then the archives are simply out of date, albeit only by a few
   minutes. Not a problem. However, if lots of files in /usr have
   changed  or  if  you  get lots of errors then perhaps your CD,
   your tapes or even your hardware could be to blame. Check your
   CD writer or tape streamer.

   Also,  don't  forget  to review /var/log/mondo-archive.log for
   more information.
     _________________________________________________________

10.8. Restore related Questions

   10.8.1. Q: Can Mondo help me move/resize/re-allocate my
          partitions?

   10.8.2. Q: My zip drive is a SCSI drive. When I restore, Mondo
          craps out, saying it can't mount the drive (because
          there is no disk in it). What do I do?

   10.8.3. Q: I received a message like, 'Fileset NNN failed'
          during restore. What does it mean.

   10.8.4. Q: Why does my ext3 partition have less space free
          than when I backed it up?

   10.8.5. Q: When I restore after booting from the CD/floppies,
          I sometimes get errors like, "Running out of memory" or
          "Segmentation fault". What is going on?

   10.8.6. >Q: I can't nuke-restore my LVM or RAID or LVM-on-RAID
          setup. I have to do it manually. What now?

   10.8.1.  Q:  Can  Mondo  help  me  move/resize/re-allocate  my
   partitions?

   A:  Yes.  Just  backup  your  system in Interactive Mode using
   Mondo. Edit the mountlist when prompted.

   10.8.2. Q: My zip drive is a SCSI drive. When I restore, Mondo
   craps  out,  saying it can't mount the drive (because there is
   no disk in it). What do I do?

   A: Restore in Interactive Mode. Delete the SCSI drive from the
   mountlist   before  you  restore.  Then  Mondo  won't  try  to
   partition  or  it.  Next  time you backup, use -E /dev/sdd (or
   whatever  your  zip drive is). The /dev entry will be excluded
   from  the  mountlist  but  not from the filelist. So, when you
   restore,  you  won't  accidentally  reformat  your  zip  disk.
   However,  after  restoring,  you  will find that /dev/sdd (the
   _file_)  will  still  be present in your /dev directory. Cool,
   eh?

   10.8.3.  Q:  I  received  a message like, 'Fileset NNN failed'
   during restore. What does it mean.

   A:  It  usually  means either you had a very large (>2GB) file
   which  was not archived owing to a flaw in your distro or your
   filesystem has changed in relation to the backup.

   10.8.4.  Q:  Why  does  my ext3 partition have less space free
   than when I backed it up?

   A:  Mondo  creates  a 10MB journal file area. Your journal was
   probably smaller than that, hence the difference.

   10.8.5.  Q: When I restore after booting from the CD/floppies,
   I  sometimes  get  errors  like,  "Running  out  of memory" or
   "Segmentation fault". What is going on?

   A: It sounds as if you are running out of disk space, probably
   ram  disk  space.  Type  'df  -m'  to see which partitions are
   running  low  on space. Please send as much information as you
   can  to the mondorescue mailing list. This problem is believed
   to have been fixed in 1.63 and 1.71.

   10.8.6. >Q: I can't nuke-restore my LVM or RAID or LVM-on-RAID
   setup. I have to do it manually. What now?

   A:  You said it yourself. You have to do it manually. :) Sorry
   but that's about it. At least you have all the tools to do it.
   I  assume you know how. If you don't, look at i-want-my-lvm (a
   script on the ramdisk) if you're using LVM. It should give you
   a  few  clues.  RAID  is  harder  but  in general Mondo's RAID
   support  is  good.  After  you've  prepped  and formatted your
   drives,  run mondorestore again but say 'no' when asked if you
   want Mondo to prep or your drives.
     _________________________________________________________

Appendix A. GNU Free Documentation License

   Version 1.1, March 2000

     Copyright (C) 2000 Free Software Foundation, Inc. 59 Temple
     Place,  Suite  330,  Boston,  MA 02111-1307 USA Everyone is
     permitted  to  copy  and distribute verbatim copies of this
     license document, but changing it is not allowed.
     _________________________________________________________

0. PREAMBLE

   The  purpose of this License is to make a manual, textbook, or
   other  written  document  "free"  in  the sense of freedom: to
   assure everyone the effective freedom to copy and redistribute
   it,  with  or  without  modifying  it,  either commercially or
   noncommercially.  Secondarily,  this License preserves for the
   author and publisher a way to get credit for their work, while
   not  being  considered  responsible  for modifications made by
   others.

   This  License  is  a  kind  of  "copyleft",  which  means that
   derivative  works  of  the document must themselves be free in
   the same sense. It complements the GNU General Public License,
   which is a copyleft license designed for free software.

   We  have  designed this License in order to use it for manuals
   for   free   software,   because   free  software  needs  free
   documentation:   a  free  program  should  come  with  manuals
   providing  the  same freedoms that the software does. But this
   License is not limited to software manuals; it can be used for
   any  textual  work, regardless of subject matter or whether it
   is  published  as  a  printed  book. We recommend this License
   principally   for   works  whose  purpose  is  instruction  or
   reference.
     _________________________________________________________

1. APPLICABILITY AND DEFINITIONS

   This License applies to any manual or other work that contains
   a  notice  placed  by  the  copyright  holder saying it can be
   distributed  under  the terms of this License. The "Document",
   below,  refers  to  any such manual or work. Any member of the
   public is a licensee, and is addressed as "you".

   A "Modified Version" of the Document means any work containing
   the  Document  or  a portion of it, either copied verbatim, or
   with modifications and/or translated into another language.

   A  "Secondary  Section"  is a named appendix or a front-matter
   section  of  the  Document  that  deals  exclusively  with the
   relationship  of  the publishers or authors of the Document to
   the  Document's  overall  subject  (or to related matters) and
   contains  nothing that could fall directly within that overall
   subject.  (For  example, if the Document is in part a textbook
   of  mathematics,  a  Secondary  Section  may  not  explain any
   mathematics.) The relationship could be a matter of historical
   connection  with  the  subject  or with related matters, or of
   legal,   commercial,   philosophical,   ethical  or  political
   position regarding them.

   The  "Invariant Sections" are certain Secondary Sections whose
   titles  are  designated, as being those of Invariant Sections,
   in  the  notice  that says that the Document is released under
   this License.

   The  "Cover Texts" are certain short passages of text that are
   listed,  as  Front-Cover  Texts  or  Back-Cover  Texts, in the
   notice  that  says  that  the  Document is released under this
   License.

   A  "Transparent" copy of the Document means a machine-readable
   copy, represented in a format whose specification is available
   to the general public, whose contents can be viewed and edited
   directly  and  straightforwardly  with generic text editors or
   (for images composed of pixels) generic paint programs or (for
   drawings)  some  widely  available drawing editor, and that is
   suitable  for  input  to  text  formatters  or  for  automatic
   translation to a variety of formats suitable for input to text
   formatters.  A  copy  made  in  an  otherwise Transparent file
   format  whose markup has been designed to thwart or discourage
   subsequent  modification by readers is not Transparent. A copy
   that is not "Transparent" is called "Opaque".

   Examples  of  suitable  formats for Transparent copies include
   plain  ASCII without markup, Texinfo input format, LaTeX input
   format,  SGML  or  XML  using  a  publicly  available DTD, and
   standard-conforming    simple    HTML   designed   for   human
   modification.   Opaque   formats   include   PostScript,  PDF,
   proprietary  formats  that  can  be  read  and  edited only by
   proprietary  word  processors,  SGML  or XML for which the DTD
   and/or  processing  tools are not generally available, and the
   machine-generated  HTML  produced  by some word processors for
   output purposes only.

   The  "Title  Page"  means,  for a printed book, the title page
   itself,  plus  such  following  pages  as  are needed to hold,
   legibly,  the  material this License requires to appear in the
   title  page.  For works in formats which do not have any title
   page  as  such,  "Title  Page"  means  the  text near the most
   prominent  appearance  of  the  work's  title,  preceding  the
   beginning of the body of the text.
     _________________________________________________________

2. VERBATIM COPYING

   You may copy and distribute the Document in any medium, either
   commercially  or  noncommercially, provided that this License,
   the  copyright  notices,  and  the  license notice saying this
   License  applies to the Document are reproduced in all copies,
   and  that  you  add no other conditions whatsoever to those of
   this  License.  You may not use technical measures to obstruct
   or  control  the  reading or further copying of the copies you
   make  or  distribute.  However, you may accept compensation in
   exchange  for  copies. If you distribute a large enough number
   of copies you must also follow the conditions in section 3.

   You  may  also  lend  copies, under the same conditions stated
   above, and you may publicly display copies.
     _________________________________________________________

3. COPYING IN QUANTITY

   If  you  publish printed copies of the Document numbering more
   than  100,  and  the  Document's license notice requires Cover
   Texts,  you  must  enclose  the  copies  in covers that carry,
   clearly  and legibly, all these Cover Texts: Front-Cover Texts
   on  the  front  cover, and Back-Cover Texts on the back cover.
   Both  covers must also clearly and legibly identify you as the
   publisher  of  these  copies. The front cover must present the
   full  title  with all words of the title equally prominent and
   visible. You may add other material on the covers in addition.
   Copying  with  changes  limited to the covers, as long as they
   preserve   the   title  of  the  Document  and  satisfy  these
   conditions,  can  be  treated  as  verbatim  copying  in other
   respects.

   If  the  required texts for either cover are too voluminous to
   fit  legibly, you should put the first ones listed (as many as
   fit  reasonably)  on  the  actual cover, and continue the rest
   onto adjacent pages.

   If  you  publish  or  distribute Opaque copies of the Document
   numbering   more   than   100,   you  must  either  include  a
   machine-readable Transparent copy along with each Opaque copy,
   or  state  in  or  with each Opaque copy a publicly-accessible
   computer-network  location  containing  a complete Transparent
   copy  of  the  Document,  free  of  added  material, which the
   general   network-using   public   has   access   to  download
   anonymously   at   no  charge  using  public-standard  network
   protocols.  If  you  use  the  latter  option,  you  must take
   reasonably  prudent  steps,  when  you  begin  distribution of
   Opaque  copies  in  quantity,  to ensure that this Transparent
   copy  will remain thus accessible at the stated location until
   at least one year after the last time you distribute an Opaque
   copy  (directly  or  through your agents or retailers) of that
   edition to the public.

   It  is  requested,  but  not  required,  that  you contact the
   authors  of  the Document well before redistributing any large
   number of copies, to give them a chance to provide you with an
   updated version of the Document.
     _________________________________________________________

4. MODIFICATIONS

   You may copy and distribute a Modified Version of the Document
   under  the conditions of sections 2 and 3 above, provided that
   you release the Modified Version under precisely this License,
   with  the  Modified  Version filling the role of the Document,
   thus  licensing  distribution and modification of the Modified
   Version  to  whoever  possesses a copy of it. In addition, you
   must do these things in the Modified Version:

    A. Use  in the Title Page (and on the covers, if any) a title
       distinct  from  that  of  the  Document, and from those of
       previous  versions  (which  should,  if there were any, be
       listed  in  the  History section of the Document). You may
       use  the  same title as a previous version if the original
       publisher of that version gives permission.
    B. List on the Title Page, as authors, one or more persons or
       entities  responsible  for authorship of the modifications
       in  the  Modified  Version, together with at least five of
       the   principal  authors  of  the  Document  (all  of  its
       principal authors, if it has less than five).
    C. State  on  the Title page the name of the publisher of the
       Modified Version, as the publisher.
    D. Preserve all the copyright notices of the Document.
    E. Add an appropriate copyright notice for your modifications
       adjacent to the other copyright notices.
    F. Include,   immediately  after  the  copyright  notices,  a
       license  notice  giving  the  public permission to use the
       Modified  Version  under the terms of this License, in the
       form shown in the Addendum below.
    G. Preserve   in  that  license  notice  the  full  lists  of
       Invariant  Sections  and required Cover Texts given in the
       Document's license notice.
    H. Include an unaltered copy of this License.
    I. Preserve  the  section  entitled "History", and its title,
       and  add  to  it an item stating at least the title, year,
       new  authors,  and  publisher  of  the Modified Version as
       given  on  the Title Page. If there is no section entitled
       "History"  in  the Document, create one stating the title,
       year,  authors,  and publisher of the Document as given on
       its  Title  Page, then add an item describing the Modified
       Version as stated in the previous sentence.
    J. Preserve  the  network  location,  if  any,  given  in the
       Document  for  public  access to a Transparent copy of the
       Document,  and likewise the network locations given in the
       Document  for previous versions it was based on. These may
       be placed in the "History" section. You may omit a network
       location for a work that was published at least four years
       before  the  Document itself, or if the original publisher
       of the version it refers to gives permission.
    K. In    any    section    entitled   "Acknowledgements"   or
       "Dedications",  preserve the section's title, and preserve
       in  the  section all the substance and tone of each of the
       contributor   acknowledgements  and/or  dedications  given
       therein.
    L. Preserve  all  the  Invariant  Sections  of  the Document,
       unaltered  in  their  text  and  in  their titles. Section
       numbers  or  the equivalent are not considered part of the
       section titles.
    M. Delete any section entitled "Endorsements". Such a section
       may not be included in the Modified Version.
    N. Do  not  retitle any existing section as "Endorsements" or
       to conflict in title with any Invariant Section.

   If  the Modified Version includes new front-matter sections or
   appendices  that  qualify as Secondary Sections and contain no
   material  copied  from  the  Document,  you may at your option
   designate  some  or  all of these sections as invariant. To do
   this,  add  their  titles to the list of Invariant Sections in
   the  Modified  Version's  license notice. These titles must be
   distinct from any other section titles.

   You  may  add  a  section entitled "Endorsements", provided it
   contains  nothing but endorsements of your Modified Version by
   various  parties--for  example,  statements  of peer review or
   that  the  text  has  been  approved by an organization as the
   authoritative definition of a standard.

   You  may  add  a  passage of up to five words as a Front-Cover
   Text, and a passage of up to 25 words as a Back-Cover Text, to
   the  end  of  the list of Cover Texts in the Modified Version.
   Only  one  passage  of  Front-Cover Text and one of Back-Cover
   Text may be added by (or through arrangements made by) any one
   entity.  If the Document already includes a cover text for the
   same  cover, previously added by you or by arrangement made by
   the  same  entity you are acting on behalf of, you may not add
   another;  but  you  may  replace  the  old  one,  on  explicit
   permission from the previous publisher that added the old one.

   The  author(s) and publisher(s) of the Document do not by this
   License  give  permission to use their names for publicity for
   or to assert or imply endorsement of any Modified Version.
     _________________________________________________________

5. COMBINING DOCUMENTS

   You  may  combine  the  Document with other documents released
   under this License, under the terms defined in section 4 above
   for  modified  versions,  provided  that  you  include  in the
   combination  all  of  the  Invariant  Sections  of  all of the
   original documents, unmodified, and list them all as Invariant
   Sections of your combined work in its license notice.

   The  combined work need only contain one copy of this License,
   and multiple identical Invariant Sections may be replaced with
   a  single  copy. If there are multiple Invariant Sections with
   the  same  name but different contents, make the title of each
   such   section   unique  by  adding  at  the  end  of  it,  in
   parentheses,  the  name of the original author or publisher of
   that  section if known, or else a unique number. Make the same
   adjustment  to  the  section  titles  in the list of Invariant
   Sections in the license notice of the combined work.

   In  the  combination,  you  must combine any sections entitled
   "History"  in  the  various  original  documents,  forming one
   section  entitled  "History";  likewise  combine  any sections
   entitled   "Acknowledgements",   and   any  sections  entitled
   "Dedications".   You   must   delete   all  sections  entitled
   "Endorsements."
     _________________________________________________________

6. COLLECTIONS OF DOCUMENTS

   You may make a collection consisting of the Document and other
   documents   released  under  this  License,  and  replace  the
   individual  copies  of  this  License in the various documents
   with  a  single  copy  that  is  included  in  the collection,
   provided  that  you  follow  the  rules  of  this  License for
   verbatim  copying  of  each  of  the  documents  in  all other
   respects.

   You  may extract a single document from such a collection, and
   distribute  it  individually  under this License, provided you
   insert a copy of this License into the extracted document, and
   follow  this  License in all other respects regarding verbatim
   copying of that document.
     _________________________________________________________

7. AGGREGATION WITH INDEPENDENT WORKS

   A  compilation  of  the Document or its derivatives with other
   separate and independent documents or works, in or on a volume
   of a storage or distribution medium, does not as a whole count
   as a Modified Version of the Document, provided no compilation
   copyright  is  claimed for the compilation. Such a compilation
   is  called  an "aggregate", and this License does not apply to
   the   other   self-contained  works  thus  compiled  with  the
   Document, on account of their being thus compiled, if they are
   not themselves derivative works of the Document.

   If  the  Cover  Text requirement of section 3 is applicable to
   these  copies  of  the  Document, then if the Document is less
   than one quarter of the entire aggregate, the Document's Cover
   Texts  may be placed on covers that surround only the Document
   within  the  aggregate.  Otherwise  they must appear on covers
   around the whole aggregate.
     _________________________________________________________

8. TRANSLATION

   Translation  is  considered a kind of modification, so you may
   distribute  translations  of  the  Document under the terms of
   section  4.  Replacing  Invariant  Sections  with translations
   requires  special permission from their copyright holders, but
   you may include translations of some or all Invariant Sections
   in  addition  to  the  original  versions  of  these Invariant
   Sections.  You  may  include  a  translation  of  this License
   provided that you also include the original English version of
   this   License.   In   case  of  a  disagreement  between  the
   translation  and the original English version of this License,
   the original English version will prevail.
     _________________________________________________________

9. TERMINATION

   You  may  not  copy,  modify,  sublicense,  or  distribute the
   Document  except as expressly provided for under this License.
   Any  other  attempt  to copy, modify, sublicense or distribute
   the  Document  is  void, and will automatically terminate your
   rights  under this License. However, parties who have received
   copies,  or  rights, from you under this License will not have
   their  licenses  terminated  so long as such parties remain in
   full compliance.
     _________________________________________________________

10. FUTURE REVISIONS OF THIS LICENSE

   The Free Software Foundation may publish new, revised versions
   of  the GNU Free Documentation License from time to time. Such
   new versions will be similar in spirit to the present version,
   but  may differ in detail to address new problems or concerns.
   See http://www.gnu.org/copyleft/.

   Each  version of the License is given a distinguishing version
   number.  If  the Document specifies that a particular numbered
   version  of this License "or any later version" applies to it,
   you  have  the  option  of  following the terms and conditions
   either  of that specified version or of any later version that
   has  been  published  (not  as  a  draft) by the Free Software
   Foundation.  If the Document does not specify a version number
   of  this  License,  you  may choose any version ever published
   (not as a draft) by the Free Software Foundation.
     _________________________________________________________

How to use this License for your documents

   To  use this License in a document you have written, include a
   copy  of  the  License  in  the document and put the following
   copyright and license notices just after the title page:

     Copyright  (c)  YEAR  YOUR  NAME.  Permission is granted to
     copy,  distribute  and/or  modify  this  document under the
     terms of the GNU Free Documentation License, Version 1.1 or
     any   later   version   published   by  the  Free  Software
     Foundation;  with  the  Invariant Sections being LIST THEIR
     TITLES, with the Front-Cover Texts being LIST, and with the
     Back-Cover  Texts  being  LIST.  A  copy  of the license is
     included  in  the  section entitled "GNU Free Documentation
     License".

   If  you  have  no Invariant Sections, write "with no Invariant
   Sections"  instead  of saying which ones are invariant. If you
   have  no  Front-Cover  Texts,  write  "no  Front-Cover  Texts"
   instead  of  "Front-Cover  Texts  being  LIST";  likewise  for
   Back-Cover Texts.

   If your document contains nontrivial examples of program code,
   we  recommend  releasing these examples in parallel under your
   choice  of  free  software  license,  such  as the GNU General
   Public License, to permit their use in free software.
