
2003-12-04  Corey Minyard <minyard@acm.org>

	* configure.in: Moved to version 2.1.

	* dataxfer.c: Have the telnet option responses use the 1xx
	responses to the com port control options.  I believe this is
	wrong, but it is consistent with other products already in the
	field.

	* dataxfer.c, ser2net.c, telnet.h: Added support for setting the
	use of Cisco IOS baud rates instead of RFC 2217 ones, by command
	option.

	* selector.c, ser2net.c: Cleaned up some compile warnings.
	
2003-10-14  Corey Minyard <minyard@acm.org>

	* configure.in: Moved to version 2.0.

	* datafer.c, devcfg.c, devcfg.h, readconfig.c, utils.h: Added
	banner support.
	
	* ser2net.h, ser2net.conf: Added documentation for banner support.
	
	* dataxfer.c, telnet.c, telnet.h: Created a more generic telnet
	command handler and split it off from dataxfer.c

	* controller.c: Moved to the new telnet command handler.

	* dataxfer.c: Added watching the CD, RI, etc. lines.
	
2003-10-13  Corey Minyard <minyard@acm.org>

	* dataxfer.c: Added a lot of the com port control handling.

2003-10-12  Corey Minyard <minyard@acm.org>

	* dataxfer.c: Added real telnet option processing infrastructure,
	getting read for com port control handling.

2003-04-22  Corey Minyard <minyard@acm.org>

	* configure.in, ser2net.spec: Move to version 1.9.

	* selector.c: Turned off debugging code that accidentally got left
	on.

2003-02-14  Corey Minyard <minyard@acm.org>

	* configure.in, ser2net.spec: Move to version 1.8.

	* dataxfer.c: Do a tcflush(fd, TCOFLUSH) before closing the
	serial device, this avoids blocking on close.

2002-11-29  Corey Minyard <minyard@acm.org>

	* selector.c: More timer heap bugs.

2002-10-01  Corey Minyard <minyard@acm.org>

	* selector.c: Fixed bugs in the timer heaps.

2002-09-23  Corey Minyard <minyard@acm.org>

	* selector.c: Fixed a bug in the timer heaps.

2002-09-09  Corey Minyard <minyard@acm.org>

	* all: Reworked the selector code to make timers more general.

2002-07-24  Corey Minyard <minyard@acm.org>

	* dataxfer.c: Fixed a bug with handling config errors, when
	an error occurs in the wrong place it will segv.

2002-04-04  Corey Minyard <minyard@acm.org>

	* util.c: added the final return value to scan_tcp_port.

2002-02-20  Corey Minyard <minyard@acm.org>

	* controller.c, dataxfer.c, dataxfer.h, ser2net.8:
	Added a "short" display, where each port is shown on one line.

	* dataxfer.c, dataxfer.h, readconfig.c, selector.c, selector.h,
	ser2net.8, ser2net.c:
	Added the ability to reread the configuration file on a SIGHUP.

	* configure.in, ser2net.spec: Moved to version 1.6
	
2002-02-20  Przemyslaw Czerpak (druzus@polbox.com),
	Corey Minyard <minyard@acm.org>

	* dataxfer.c, dataxfer.h, configure.in, ser2net.c, ser2net.8:
	Added UUCP-style locking for ports.

2002-02-19  Corey Minyard <minyard@acm.org>

	* controller.c, controller.h, dataxfer.c, devcfg.c, ser2net.c,
	ser2net.conf, ser2net.8, utils.c utils.h:
	Added support for specifying the IP address with the port to
	bind to specific interfaces.

	* dataxfer.c: Added counting the input and output bytes.

2002-02-19  Przemyslaw Czerpak (druzus@polbox.com)

	* controller.c, dataxfer.c, devcfg.c, ser2net.c, ser2net.conf,
	ser2net.8:
	Added support for turning on/off RTS/CTS, XON/XOFF, and LOCAL.
	Also added support for raw LP devices.

2001-10-05  Przemyslaw Czerpak (druzus@polbox.com)

	* controller.c, dataxfer.c, devcfg.c, ser2net.init, ser2net.spec:
	Added an init, and cleaned up a bunch of type warnings.

	* devcfg.c, ser2net.8, ser2net.conf: Added support for RTS/CTS.

2001-08-11  Corey Minyard <minyard@acm.org>

	* devcfg.h, devcfg.c, controller.c, dataxfer.c, dataxfer.h, ser2net.8:
	Ben Adams sent a patch to control the DTR and RTS lines, I rewrote
	it to make a new command to do this (instead of using devconfig,
	which didn't really match the devconfig's operation).

	* configure.in, ser2net.spec: Updated to version 1.5

2001-07-26  Corey Minyard <minyard@acm.org>

	* devcfg.c - Added CREAD to the cflags so the serial port will
	work, patch from Andreas Pfaller.

	* dataxfer.c - Added binary transmission to the list of telnet
	opeions, again from Andreas Pfaller.

2001-07-23  Corey Minyard <minyard@acm.org>

	* devcfg.c, ser2net.8, ser2net.conf  - Added a patch from Martin
	Boese to add CLOCAL and XON/XOFF support as serial port options.

2001-07-03  Corey Minyard <minyard@acm.org>
	
	* Makefile.am, ser2net.1, ser2net.8, ser2net.spec - Moved ser2net
	to /usr/sbin, renamed the makefile to have a .8 extension and
	put it in /usr/share/man.

	* controller.c - Fixed problems with telnet handling in the
	control interface.
	
	* Updated to version 1.4
	
2001-06-29  Corey Minyard <minyard@acm.org>

	* ser2net.spec - Actually put the changed version number in
	the file, set the prefix to '/usr'.

	* configure.in - Added libnsl for Redhat systems, changed
	to AC_CHECK_LIB.

	* all - changed to version 1.3.

2001-06-28  Corey Minyard <minyard@acm.org>

	* dataxfer.c - Added the ability to convert a telnet break
	to a serial port break.

	* configure.in - Updated to version 1.3

	* ser2net.spec - Added this file for RPM building, from Ivan
	Francolin Martinez.

	* dataxfer.c - Added a tcp_wrappers implementation, from Ivan
	Francolin Martinez.  However, some configure work needs to
	be done to make it actually work properly.

	* dataxfer.c, controller.c, configure.in, ser2net.1 - Fixed the
	tcp_wrappers stuff to work properly, did the config stuff for it,
	and added it to the control port as well.

2001-06-15  Corey Minyard <minyard@acm.org>
	
	* controller.c - Made sure the monitor port was set to null
	when the port exited.

	* ser2net.c, ser2net.1 - Added a "-d" option to send debug
	output to the console and modified "-n" to just not detach.
	
2001-06-05  Corey Minyard <minyard@acm.org>

	* ser2net.c, controller.c - added a way to query the version from
	the command line and from the controller port.

	* controller.c, controller.h, dataxfer.c, dataxfer.h - added
	monitoring of data flowing into a port.  It's somewhat primitive
	yet, but still useful

	* controller.c, dataxfer.c, dataxfer.h - added a way to disconnect
	a port from the control port.

2001-06-04  Corey Minyard <minyard@acm.org>

	* Initial creation.

